|
Physical Properties | Metric | English | Comments |
---|
Bulk Density | 0.800 g/cc | 0.0289 lb/in³ |
Density | 1.30 g/cc | 0.0470 lb/in³ |
Moisture Absorption at Equilibrium | 0.20 % | 0.20 % |
Water Absorption at Saturation | 0.50 % | 0.50 % |
Viscosity Test | 105 cm³/g | 1.05 dl/g |
Linear Mold Shrinkage, Flow | 0.019 cm/cm | 0.019 in/in |
Linear Mold Shrinkage, Transverse | 0.019 cm/cm | 0.019 in/in |
Melt Flow | 45 g/10 min @Load 2.16 kg, Temperature 250 °C | 45 g/10 min @Load 4.76 lb, Temperature 482 °F |
|
Mechanical Properties | Metric | English | Comments |
---|
Puncture Resistance | 3800 N @Temperature -30.0 °C | 854 lb (f) @Temperature -22.0 °F |
Ball Indentation Hardness | 120 MPa | 17400 psi |
Tensile Strength, Yield | 55.0 MPa | 7980 psi |
Elongation at Break | >= 20 % | >= 20 % |
Elongation at Yield | 8.0 % | 8.0 % |
Tensile Modulus | 2.70 GPa | 392 ksi |
Flexural Strength | 90.0 MPa | 13100 psi |
Flexural Yield Strength | 75.0 MPa @Strain 3.5 % | 10900 psi @Strain 3.5 % |
Flexural Modulus | 2.70 GPa | 392 ksi |
Flexural Strain at Break | 6.0 % | 6.0 % |
Izod Impact, Notched (ISO) | <= 10.0 kJ/m² @Temperature 23.0 °C | <= 4.76 ft-lb/in² @Temperature 73.4 °F |
| <= 10.0 kJ/m² @Temperature -30.0 °C | <= 4.76 ft-lb/in² @Temperature -22.0 °F |
| <= 10.0 kJ/m² @Temperature -40.0 °C | <= 4.76 ft-lb/in² @Temperature -40.0 °F |
Izod Impact, Unnotched (ISO) | 150 kJ/m² @Temperature 23.0 °C | 71.4 ft-lb/in² @Temperature 73.4 °F |
| 150 kJ/m² @Temperature -30.0 °C | 71.4 ft-lb/in² @Temperature -22.0 °F |
Charpy Impact Unnotched | 15.0 J/cm² @Temperature -30.0 °C | 71.4 ft-lb/in² @Temperature -22.0 °F |
| 22.0 J/cm² @Temperature 23.0 °C | 105 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | <= 1.00 J/cm² @Temperature 23.0 °C | <= 4.76 ft-lb/in² @Temperature 73.4 °F |
| <= 1.00 J/cm² @Temperature -30.0 °C | <= 4.76 ft-lb/in² @Temperature -22.0 °F |
Puncture Energy | 15.0 J @Temperature -30.0 °C | 11.1 ft-lb @Temperature -22.0 °F |
| 40.0 J @Temperature 23.0 °C | 29.5 ft-lb @Temperature 73.4 °F |
Tensile Creep Modulus, 1 hour | 2400 MPa | 348000 psi |
Tensile Creep Modulus, 1000 hours | 1400 MPa | 203000 psi |
|
Electrical Properties | Metric | English | Comments |
---|
Dielectric Constant | 3.2 @Frequency 1e+6 Hz | 3.2 @Frequency 1e+6 Hz |
| 3.4 @Frequency 100 Hz | 3.4 @Frequency 100 Hz |
Dielectric Strength | 28.0 kV/mm @Thickness 1.00 mm | 711 kV/in @Thickness 0.0394 in |
Comparative Tracking Index | 300 V | 300 V |
| 600 V | 600 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 120 µm/m-°C @Temperature 23.0 - 55.0 °C | 66.7 µin/in-°F @Temperature 73.4 - 131 °F |
CTE, linear, Transverse to Flow | 130 µm/m-°C @Temperature 23.0 - 55.0 °C | 72.2 µin/in-°F @Temperature 73.4 - 131 °F |
Thermal Conductivity | 0.250 W/m-K | 1.74 BTU-in/hr-ft²-°F |
Melting Point | 225 °C | 437 °F |
Maximum Service Temperature, Air | 190 °C | 374 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 160 °C | 320 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F |
Deflection Temperature at 8.0 MPa | 45.0 °C | 113 °F |
Vicat Softening Point | 180 °C @Load 5.10 kg | 356 °F @Load 11.2 lb |
Flammability, UL94 | HB @Thickness 0.800 mm | HB @Thickness 0.0315 in |
| HB @Thickness 1.60 mm | HB @Thickness 0.0630 in |
Oxygen Index | 24 % | 24 % |
Glow Wire Flammability Index | 750 °C @Thickness 2.00 mm | 1380 °F @Thickness 0.0787 in |
Shrinkage, MD | 0.50 % @Treatment Temp. 150 °C, Time 3600 sec | 0.50 % @Treatment Temp. 302 °F, Time 1.00 hour |
Shrinkage, TD | 0.50 % @Treatment Temp. 150 °C, Time 3600 sec | 0.50 % @Treatment Temp. 302 °F, Time 1.00 hour |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 260 °C | 500 °F |
Mold Temperature | 80.0 °C | 176 °F |
Drying Temperature | 120 °C | 248 °F |
Dry Time | 4.00 - 8.00 hour | 4.00 - 8.00 hour |
Moisture Content | 0.00 - 0.020 % | 0.00 - 0.020 % |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.