|
Physical Properties | Metric | English | Comments |
---|
Density | 1.51 g/cc | 0.0546 lb/in³ |
Water Absorption | 0.010 % @Temperature 23.0 °C | 0.010 % @Temperature 73.4 °F |
Moisture Absorption at Equilibrium | 0.050 % | 0.050 % |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore A | >= 100 | >= 100 |
Hardness, Shore D | 83 | 83 |
Ball Indentation Hardness | 134 MPa | 19400 psi |
Tensile Strength at Break | 50.0 MPa | 7250 psi |
Tensile Strength | 50.0 MPa | 7250 psi |
Tensile Strength, Yield | 47.0 MPa | 6820 psi |
Tensile Stress at Strain | 19.0 MPa @Strain 1 %, Time 3.60e+6 sec | 2760 psi @Strain 1 %, Time 1000 hour |
Elongation at Break | 4.5 % | 4.5 % |
Elongation at Yield | 1.3 % | 1.3 % |
| 4.5 % | 4.5 % |
Tensile Modulus | 3.50 GPa | 508 ksi |
Flexural Strength | 74.0 MPa | 10700 psi |
| 80.0 MPa | 11600 psi |
| 81.0 MPa | 11700 psi |
Flexural Modulus | 3.00 GPa | 435 ksi |
Flexural Strain at Break | 4.5 % | 4.5 % |
Flexural Strain at Yield | 4.9 % | 4.9 % |
Compressive Strain at Break | 11 % | 11 % |
| 31 % | 31 % |
Compressive Strain at Yield | 31 % | 31 % |
Compressive Yield Strength | 71.0 MPa | 10300 psi |
| 109 MPa | 15800 psi |
Compressive Strength | 92.0 MPa | 13300 psi |
| 109 MPa | 15800 psi |
| 25.0 MPa @Time 3.60e+7 sec | 3630 psi @Time 10000 hour |
| 37.0 MPa @Time 360000 sec | 5370 psi @Time 100 hour |
| 76.0 MPa @Time 36.0 sec | 11000 psi @Time 0.0100 hour |
| 29.0 MPa @Strain 3.5 % | 4210 psi @Strain 3.5 % |
Compressive Modulus | 3.50 GPa | 508 ksi |
Fatigue Strength | 40.0 MPa @# of Cycles 1.00e+6 | 5800 psi @# of Cycles 1.00e+6 |
K Factor (ISO) | 0.50 µm/km @Temperature 20.0 °C | 0.50 µm/km @Temperature 68.0 °F |
| 1.1 µm/km @Temperature 100 °C | 1.1 µm/km @Temperature 212 °F |
| 3.3 µm/km @Temperature 200 °C | 3.3 µm/km @Temperature 392 °F |
| 4.2 µm/km @Temperature 240 °C | 4.2 µm/km @Temperature 464 °F |
Charpy Impact Unnotched | 2.80 J/cm² | 13.3 ft-lb/in² |
Charpy Impact, Notched | 0.917 J/cm² | 4.36 ft-lb/in² |
Coefficient of Friction, Dynamic | 0.11 @Temperature 100 °C | 0.11 @Temperature 212 °F |
| 0.17 @Temperature 20.0 °C | 0.17 @Temperature 68.0 °F |
Coefficient of Friction, Static | 0.18 @Temperature 20.0 °C | 0.18 @Temperature 68.0 °F |
Tensile Creep Modulus, 1000 hours | 1900 MPa | 276000 psi |
Limiting Pressure Velocity | 0.400 MPa-m/sec | 11400 psi-ft/min |
| 0.624 MPa-m/sec | 17800 psi-ft/min |
| 0.66666 MPa-m/sec | 19033 psi-ft/min |
| 1.26 MPa-m/sec | 36000 psi-ft/min |
Compression Set | 6.5 % | 6.5 % |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 4.50e+16 ohm-cm | 4.50e+16 ohm-cm |
Surface Resistance | 4.40e+16 ohm | 4.40e+16 ohm |
Dielectric Constant | 4.1 @Frequency 110 Hz | 4.1 @Frequency 110 Hz |
Dielectric Strength | 24.0 kV/mm | 610 kV/in |
Dissipation Factor | 0.020 | 0.020 |
| 0.055 @Frequency 110 Hz | 0.055 @Frequency 110 Hz |
Comparative Tracking Index | 130 V | 130 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear | 60.0 µm/m-°C @Temperature <=100 °C | 33.3 µin/in-°F @Temperature <=212 °F |
| 90.0 µm/m-°C @Temperature <=150 °C | 50.0 µin/in-°F @Temperature <=302 °F |
Specific Heat Capacity | 0.890 J/g-°C | 0.213 BTU/lb-°F |
Melting Point | 320 °C | 608 °F |
Maximum Service Temperature, Air | 90.0 °C | 194 °F |
| 240 °C | 464 °F |
| 290 °C | 554 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 135 °C | 275 °F |
Glass Transition Temp, Tg | 110 °C | 230 °F |
Flammability, UL94 | V-0 | V-0 |
Oxygen Index | 47 % | 47 % |
|
Compliance Properties | Metric | English | Comments |
---|
FDA | Yes | Yes |
|
Descriptive Properties |
---|
Alignment Adjustment | 2 |
Chemical Sterilization | 10 |
Color | Beige |
Creep Resistance | 4 |
Dimensional Stability with Thermal Expansion | 4 |
Free from Silicon | Applicable |
Gamma-rays Radiation Sterilization | 4 |
High Precision Bushings (negative clearance) | Applicable |
Injection Molded Parts | Applicable |
Machined Parts | Applicable |
Moist Heat Sterilization | 7 |
Plastic Granules | Applicable |
Rate of Desorption | 2.8E-07 |
Resistance Against dust, Dirt, Abrasive Substances | 6 |
Resistance Against Hot Water | 140 |
Resistance to Chemicals | 10 |
Resistant Against Disinfectant | Applicable |
Rods up to Øe (de) | Applicable |
ROHS/WEEE | Applicable |
Sheets up to Maximum Thickness | Applicable |
Sliding Velocity | 300 |
Suitable for Outdoor Use | 7 |
Suitable for Use in Water | Applicable |
Suitable for Vacuum | Applicable |
UV Rays Resistance | 8 |
UV-Sterilization | 7 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.