|
Physical Properties | Metric | English | Comments |
---|
Density | 1.30 g/cc | 0.0470 lb/in³ |
Water Absorption | 0.050 % @Temperature 23.0 °C | 0.050 % @Temperature 73.4 °F |
Moisture Absorption at Equilibrium | 0.50 % | 0.50 % |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore A | 93 | 93 |
Hardness, Shore D | 81 | 81 |
Ball Indentation Hardness | 174 MPa | 25200 psi |
Tensile Strength at Break | 84.0 MPa | 12200 psi |
Tensile Strength | 110 MPa | 16000 psi |
Tensile Strength, Yield | 81.0 MPa | 11700 psi |
| 110 MPa | 16000 psi |
Tensile Stress at Strain | 43.0 MPa @Strain 1 %, Time 3.60e+6 sec | 6240 psi @Strain 1 %, Time 1000 hour |
Elongation at Break | 12.6 % | 12.6 % |
| 12.6 % | 12.6 % |
Elongation at Yield | 4.2 % | 4.2 % |
| 7.0 % | 7.0 % |
| 7.0 % | 7.0 % |
Tensile Modulus | 3.60 GPa | 522 ksi |
Flexural Strength | 126 MPa | 18300 psi |
| 168 MPa | 24400 psi |
Flexural Modulus | 4.00 GPa | 580 ksi |
Flexural Strain at Yield | 6.3 % | 6.3 % |
Compressive Strain at Break | 6.9 % | 6.9 % |
Compressive Strain at Yield | 3.2 % | 3.2 % |
Compressive Yield Strength | 120 MPa | 17400 psi |
Compressive Strength | 58.0 MPa @Time 3.60e+7 sec | 8410 psi @Time 10000 hour |
| 107 MPa @Time 360000 sec | 15500 psi @Time 100 hour |
| 120 MPa @Time 36.0 sec | 17400 psi @Time 0.0100 hour |
| 32.0 MPa @Strain 3.5 % | 4640 psi @Strain 3.5 % |
Compressive Modulus | 4.27 GPa | 619 ksi |
Fatigue Strength | 60.0 MPa @# of Cycles 1.00e+6 | 8700 psi @# of Cycles 1.00e+6 |
K Factor (ISO) | 5.3 µm/km @Temperature 200 °C | 5.3 µm/km @Temperature 392 °F |
| 6.6 µm/km @Temperature 240 °C | 6.6 µm/km @Temperature 464 °F |
| 8.9 µm/km @Temperature 100 °C | 8.9 µm/km @Temperature 212 °F |
| 11.5 µm/km @Temperature 20.0 °C | 11.5 µm/km @Temperature 68.0 °F |
Charpy Impact Unnotched | NB | NB |
Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² |
Coefficient of Friction, Dynamic | 0.060 @Temperature 100 °C | 0.060 @Temperature 212 °F |
| 0.070 @Temperature 20.0 °C | 0.070 @Temperature 68.0 °F |
Coefficient of Friction, Static | 0.090 @Temperature 20.0 °C | 0.090 @Temperature 68.0 °F |
Tensile Creep Modulus, 1000 hours | 4300 MPa | 624000 psi |
Limiting Pressure Velocity | 0.16666 MPa-m/sec | 4758.1 psi-ft/min |
| 0.1667 MPa-m/sec | 4758 psi-ft/min |
| 0.31866 MPa-m/sec | 9097.7 psi-ft/min |
| 0.480 MPa-m/sec | 13700 psi-ft/min |
Compression Set | 8.8 % | 8.8 % |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 5.00e+16 ohm-cm | 5.00e+16 ohm-cm |
Surface Resistance | 2.80e+12 ohm | 2.80e+12 ohm |
Dielectric Constant | 3.2 @Frequency 110 Hz | 3.2 @Frequency 110 Hz |
Dielectric Strength | 22.5 kV/mm | 572 kV/in |
Dissipation Factor | 0.0030 | 0.0030 |
| 0.052 @Frequency 110 Hz | 0.052 @Frequency 110 Hz |
Comparative Tracking Index | 150 V | 150 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear | 51.0 µm/m-°C @Temperature <=100 °C | 28.3 µin/in-°F @Temperature <=212 °F |
| 59.0 µm/m-°C @Temperature <=150 °C | 32.8 µin/in-°F @Temperature <=302 °F |
Specific Heat Capacity | 1.35 J/g-°C | 0.323 BTU/lb-°F |
Thermal Conductivity | 0.250 W/m-K | 1.74 BTU-in/hr-ft²-°F |
Melting Point | 340 °C | 644 °F |
Maximum Service Temperature, Air | 100 °C | 212 °F |
| 250 °C | 482 °F |
| 260 °C | 500 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F |
Glass Transition Temp, Tg | 146 °C | 295 °F |
Flammability, UL94 | V-0 | V-0 |
Oxygen Index | 35 % | 35 % |
|
Compliance Properties | Metric | English | Comments |
---|
FDA | Yes | Yes |
|
Descriptive Properties |
---|
Alignment Adjustment | 4 |
Chemical Sterilization | 10 |
Color | Beige |
Creep Resistance | 6 |
Dimensional Stability with Thermal Expansion | 6 |
Free from PTFE | Applicable |
Free from Silicon | Applicable |
Gamma-rays Radiation Sterilization | 10 |
High Precision Bushings (negative clearance) | Applicable |
Injection Molded Parts | Applicable |
Machined Parts | Applicable |
Moist Heat Sterilization | 10 |
Plastic Granules | Applicable |
Resistance Against dust, Dirt, Abrasive Substances | 7 |
Resistance Against Hot Water | 200 |
Resistance to Chemicals | 9 |
Resistant Against Disinfectant | Applicable |
Rods up to Øe (de) | Applicable |
ROHS/WEEE | Applicable |
Sheets up to Maximum Thickness | Applicable |
Sliding Velocity | 40 |
Suitable for Outdoor Use | 6 |
Suitable for Use in Water | Applicable |
Suitable for Vacuum | Applicable |
Tubes (hollow rods) up to Øe (de) | Applicable |
UV Rays Resistance | 9 |
UV-Sterilization | 7 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.