Available Properties |
---|
- Density, ISO 1183, DAM
- Water Absorption, Sim. to ISO 62, DAM
- Moisture Absorption, Sim. to ISO 62, DAM
- Linear Mold Shrinkage, Flow, ISO 294-4, 2577, DAM
- Linear Mold Shrinkage, Transverse, ISO 294-4, 2577, DAM
- Tensile Strength at Break, ISO 527-1/-2, 50% RH
- Tensile Strength at Break, ISO 527-1/-2, DAM
- Elongation at Break, ISO 527-1/-2, DAM
- Elongation at Break, ISO 527-1/-2, 50% RH
- Tensile Modulus, ISO 527-1/-2, 50% RH
- Tensile Modulus, ISO 527-1/-2, DAM
- Flexural Strength, ISO 178, DAM
- Flexural Strength, ISO 178, DAM
- Flexural Modulus, ISO 178, DAM
- Poissons Ratio, 50% RH
- Poissons Ratio, DAM
- Charpy Impact Unnotched, ISO 179/1eU, 50% RH
- Charpy Impact Unnotched, ISO 179/1eU, DAM
- Charpy Impact Unnotched, ISO 179/1eU, 50% RH
- Charpy Impact Unnotched, ISO 179/1eU, DAM
- Charpy Impact, Notched, ISO 179/1eA, 50% RH
- Charpy Impact, Notched, ISO 179/1eA, 50% RH
- Charpy Impact, Notched, ISO 179/1eA, DAM
- Charpy Impact, Notched, ISO 179/1eA, DAM
- Volume Resistivity, IEC 62631-3-1, 50% RH
- Volume Resistivity, IEC 62631-3-1, DAM
- Surface Resistance, IEC 62631-3-2, 50% RH
- Dielectric Constant, IEC 62631-2-1, DAM
- Dielectric Constant, IEC 62631-2-1, DAM
- Dielectric Strength, IEC 60243-1, DAM
- Dissipation Factor, IEC 62631-2-1, DAM
- Dissipation Factor, IEC 62631-2-1, DAM
- CTE, linear, Parallel to Flow, ISO 11359-1/-2, DAM
- CTE, linear, Parallel to Flow, ISO 11359-1/-2, DAM
- CTE, linear, Parallel to Flow, ASTM E 831, DAM
- CTE, linear, Transverse to Flow, ISO 11359-1/-2, DAM
- Melting Point, ISO 11357-1/-3, 10°C/min; DAM
- Melt Temperature, Optimum, Injection
- Melt Temperature, Range, Injection
- Mold Temperature, Optimum, Injection
- Mold Temperature, Injection; higher temperature needed for thinner sections
- Drying Temperature, Injection
- Dry Time, Injection, Dehumidified Dryer
- Moisture Content, Injection
|
| | |