(Viewing data as-entered. Click here to return)
|
Physical Properties | Original Value | Comments |
---|
Density | 1.45 g/cc |
Melt Density | 1.28 g/cc @Temperature 295 °C |
Water Absorption | 1.0 % @Time 86400 sec |
| 5.4 % @Thickness 2.00 mm |
Moisture Absorption | 1.40 % @Thickness 2.00 mm |
Linear Mold Shrinkage, Flow | 0.0070 cm/cm |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 82.0 MPa |
| 130 MPa |
Elongation at Break | 3.5 % |
| 10 % |
Tensile Modulus | 5000 MPa |
| 7500 MPa |
Flexural Modulus | 5000 MPa |
| 6500 MPa |
Poissons Ratio | 0.34 |
| 0.35 |
Izod Impact, Notched (ISO) | 4.00 kJ/m² @Temperature -40.0 °C |
| 4.00 kJ/m² @Temperature -40.0 °C |
| 4.00 kJ/m² @Temperature -30.0 °C |
| 4.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature 23.0 °C |
| 6.00 kJ/m² @Temperature 23.0 °C |
Izod Impact, Unnotched (ISO) | 40.0 kJ/m² @Temperature -30.0 °C |
| 40.0 kJ/m² @Temperature 23.0 °C |
| 50.0 kJ/m² @Temperature 23.0 °C |
| 50.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact Unnotched | 35.0 kJ/m² @Temperature -30.0 °C |
| 40.0 kJ/m² @Temperature -30.0 °C |
| 45.0 kJ/m² @Temperature 23.0 °C |
| 50.0 kJ/m² @Temperature 23.0 °C |
Charpy Impact, Notched | 3.00 kJ/m² @Temperature -40.0 °C |
| 3.00 kJ/m² @Temperature -40.0 °C |
| 3.00 kJ/m² @Temperature -30.0 °C |
| 4.00 kJ/m² @Temperature -30.0 °C |
| 4.00 kJ/m² @Temperature 23.0 °C |
| 6.00 kJ/m² @Temperature 23.0 °C |
Tensile Creep Modulus, 1 hour | 2300 MPa |
Tensile Creep Modulus, 1000 hours | 1500 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+9 ohm-cm |
| 1.00e+13 ohm-cm |
Surface Resistance | 3.00e+12 ohm |
Dielectric Constant | 4.0 @Frequency 1e+6 Hz |
| 4.0 @Frequency 1e+6 Hz |
| 4.0 @Frequency 100 Hz |
| 7.0 @Frequency 100 Hz |
Dielectric Strength | 39.0 kV/mm |
| 40.0 kV/mm |
Dissipation Factor | 0.010 @Frequency 1e+6 Hz |
| 0.010 @Frequency 100 Hz |
| 0.020 @Frequency 100 Hz |
| 0.050 @Frequency 1e+6 Hz |
Comparative Tracking Index | 475 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 41.0 µm/m-°C |
CTE, linear, Transverse to Flow | 62.0 µm/m-°C |
Specific Heat Capacity | 2.10 J/g-°C @Temperature 295 °C |
Thermal Conductivity | 0.250 W/m-K @Temperature 295 °C |
Melting Point | 263 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 255 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 230 °C |
Glass Transition Temp, Tg | 80.0 °C |
Flammability, UL94 | HB @Thickness 0.810 mm |
| HB @Thickness 1.50 mm |
Flame Spread | 40.0 mm/min @Thickness 1.00 mm |
Oxygen Index | 24 % |
|
Processing Properties | Original Value | Comments |
---|
Melt Temperature | 295 °C |
| 285 - 305 °C |
Mold Temperature | 70.0 - 120 °C |
| 100 °C |
Ejection Temperature | 210 °C |
Drying Temperature | 80.0 °C |
Dry Time | 2.00 - 4.00 hour |
Moisture Content | <= 0.20 % |
Hold Pressure | 50.0 - 100 MPa |
| 100 MPa |
|
Descriptive Properties |
---|
Drying Recommended | yes |
FMVSS Class | B |
ISO designation | ISO 16396-PA66,(MD+GF)38,M1GHNO2R,S14-070 |
Max. screw tangential speed (m/s) | 0.2 |
Part Marking Code | >PA66-(MD+GF)38< |
Polymer | PA66-(MD+GF)38 |
Processing Hold Pressure Time (s/mm) | 3 |
Regional Availability | Asia Pacific |
| North America |
| South and Central America |
Resin Identification | PA66-(MD+GF)38 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.