|
Physical Properties | Original Value | Comments |
---|
Density | 1.14 g/cc |
Water Absorption | 1.64 % @Time 86400 sec |
Moisture Absorption at Equilibrium | 2.4 % |
Linear Mold Shrinkage, Flow | 0.013 cm/cm @Thickness 2.00 mm |
Linear Mold Shrinkage, Transverse | 0.017 cm/cm @Thickness 2.00 mm |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 64.0 MPa |
| 90.0 MPa |
Tensile Strength, Yield | 67.0 MPa |
| 95.0 MPa |
Elongation at Break | 15 % |
| 23 % |
Elongation at Yield | 5.2 % |
| 18 % |
Tensile Modulus | 2300 MPa |
| 3400 MPa |
Flexural Strength | 28.0 MPa |
| 103 MPa |
Flexural Modulus | 1200 MPa |
| 3300 MPa |
Poissons Ratio | 0.40 |
Izod Impact, Notched (ISO) | 3.00 kJ/m² @Temperature -40.0 °C |
| 3.00 kJ/m² @Temperature -30.0 °C |
| 4.00 kJ/m² @Temperature -40.0 °C |
| 4.00 kJ/m² @Temperature -30.0 °C |
| 4.00 kJ/m² @Temperature 23.0 °C |
| 6.00 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | NB @Temperature -40.0 °C |
| NB @Temperature -40.0 °C |
| NB @Temperature -30.0 °C |
| NB @Temperature -30.0 °C |
| NB @Temperature 23.0 °C |
| NB @Temperature 23.0 °C |
Charpy Impact, Notched | 3.00 kJ/m² @Temperature -40.0 °C |
| 3.00 kJ/m² @Temperature -40.0 °C |
| 3.00 kJ/m² @Temperature -30.0 °C |
| 3.00 kJ/m² @Temperature -30.0 °C |
| 4.00 kJ/m² @Temperature 23.0 °C |
| 4.00 kJ/m² @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+13 ohm-cm @Thickness 1.00 mm |
Arc Resistance | 120 - 180 sec @Thickness 3.00 mm |
Hot Wire Ignition, HWI | 7.0 - 15 sec |
| 7.0 - 15 sec |
| 15 - 30 sec |
| 30 - 60 sec |
High Amp Arc Ignition, HAI | 60 - 120 arcs |
| >= 120 arcs |
| >= 120 arcs |
| >= 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | 0.000 - 10.0 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 100 µm/m-°C @Thickness 2.00 mm, Temperature 35.0 - 55.0 °C |
CTE, linear, Transverse to Flow | 100 µm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
Melting Point | 262 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 221 °C |
| 232 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 78.0 °C |
UL RTI, Electrical | 130 °C @Thickness 0.400 mm |
| 130 °C @Thickness 0.710 mm |
| 130 °C @Thickness 1.50 mm |
| 130 °C @Thickness 3.00 mm |
UL RTI, Mechanical with Impact | 75.0 °C @Thickness 0.400 mm |
| 75.0 °C @Thickness 0.710 mm |
| 75.0 °C @Thickness 1.50 mm |
| 75.0 °C @Thickness 3.00 mm |
UL RTI, Mechanical without Impact | 75.0 °C @Thickness 0.400 mm |
| 85.0 °C @Thickness 0.710 mm |
| 85.0 °C @Thickness 1.50 mm |
| 85.0 °C @Thickness 3.00 mm |
Flammability, UL94 | V-2 @Thickness 0.400 mm |
| V-2 @Thickness 0.710 mm |
| V-2 @Thickness 1.50 mm |
| V-2 @Thickness 3.00 mm |
Oxygen Index | 26 % |
Glow Wire Ignition Temperature | 825 °C @Thickness 0.400 mm |
| 850 °C @Thickness 0.710 mm |
| 850 °C @Thickness 1.50 mm |
| 850 °C @Thickness 3.00 mm |
Glow Wire Flammability Index | 960 °C @Thickness 0.400 mm |
| 960 °C @Thickness 0.710 mm |
| 960 °C @Thickness 1.50 mm |
| 960 °C @Thickness 3.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Rear Barrel Temperature | 260 - 280 °C |
Middle Barrel Temperature | 270 - 285 °C |
Front Barrel Temperature | 280 - 290 °C |
Nozzle Temperature | 280 - 300 °C |
Melt Temperature | 285 - 300 °C |
Mold Temperature | 65.0 - 95.0 °C |
Drying Temperature | 80.0 °C |
Dry Time | 4.00 hour |
|
Descriptive Properties |
---|
Additive | Lubricant |
Agency Ratings | ASTM, D4066 PA0131 |
| ASTM, D6779 PA0131 |
| EC, 1935/2004 |
| EU, 10/2011 |
| EU, 2023/2006 |
| FDA, 21 CFR 177.1500 |
| FED, L-P-410A |
| NSF, STD-51 |
Appearance | Natural Color |
Automotive Material Specification | Toyota TSM5516G Class 2 (compliance) |
Features | Fast Molding Cycle |
| General Purpose |
| Good Mold Release |
| Good Stiffness |
| High Crystallinity |
| High Rigidity |
| Lubricated |
| Nucleated |
Forms | Pellets |
Outdoor Suitability | f2 |
Processing Method | Injection Molding |
Region | North America, Europe, Asia Pacific |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.