|
Physical Properties | Metric | English | Comments |
---|
Specific Gravity | 1.20 g/cc | 1.20 g/cc |
| 1.20 g/cc | 1.20 g/cc |
Density | 1.19 g/cc | 0.0430 lb/in³ |
Water Absorption | 0.15 % | 0.15 % |
Moisture Absorption at Equilibrium | 0.35 % | 0.35 % |
| 0.58 % @Temperature 100 °C | 0.58 % @Temperature 212 °F |
Linear Mold Shrinkage, Flow | 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm | 0.0050 - 0.0070 in/in @Thickness 0.126 in |
Melt Flow | 23 g/10 min @Load 1.20 kg, Temperature 300 °C | 23 g/10 min @Load 2.65 lb, Temperature 572 °F |
| 25 g/10 min @Load 1.20 kg, Temperature 300 °C | 25 g/10 min @Load 2.65 lb, Temperature 572 °F |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Rockwell M | 70 | 70 |
Hardness, Rockwell R | 118 | 118 |
Tensile Strength at Break | 50.0 MPa | 7250 psi |
| 65.0 MPa | 9430 psi |
Tensile Strength, Yield | 62.0 MPa | 8990 psi |
| 63.0 MPa | 9140 psi |
Elongation at Break | 70 % | 70 % |
| 120 % | 120 % |
Elongation at Yield | 6.0 % | 6.0 % |
| 6.0 % | 6.0 % |
Tensile Modulus | 2.35 GPa | 341 ksi |
| 2.37 GPa | 344 ksi |
Flexural Yield Strength | 90.0 MPa | 13100 psi |
| 93.0 MPa | 13500 psi |
Flexural Modulus | 2.30 GPa | 334 ksi |
| 2.30 GPa | 334 ksi |
Izod Impact, Notched | 6.40 J/cm | 12.0 ft-lb/in |
| 6.40 J/cm | 12.0 ft-lb/in |
Izod Impact, Unnotched | 32.04 J/cm | 60.02 ft-lb/in |
Izod Impact, Notched (ISO) | 12.0 kJ/m² | 5.71 ft-lb/in² |
| 10.0 kJ/m² @Temperature -30.0 °C | 4.76 ft-lb/in² @Temperature -22.0 °F |
Izod Impact, Unnotched (ISO) | NB | NB |
| NB @Temperature -30.0 °C | NB @Temperature -22.0 °F |
Charpy Impact, Notched | 1.20 J/cm² | 5.71 ft-lb/in² |
| 1.00 J/cm² @Temperature -30.0 °C | 4.76 ft-lb/in² @Temperature -22.0 °F |
Tensile Impact Strength | 378 kJ/m² | 180 ft-lb/in² |
Dart Drop, Total Energy | 54.0 J | 39.8 ft-lb |
Falling Dart Impact | 169 J | 125 ft-lb |
Taber Abrasion, mg/1000 Cycles | 10 | 10 |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm |
| >= 1.00e+17 ohm-cm | >= 1.00e+17 ohm-cm |
Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm |
Dielectric Constant | 2.7 @Frequency 1e+6 Hz | 2.7 @Frequency 1e+6 Hz |
| 2.7 @Frequency 50.0 - 60.0 Hz | 2.7 @Frequency 50.0 - 60.0 Hz |
| 2.96 @Frequency 1e+6 Hz | 2.96 @Frequency 1e+6 Hz |
| 3.17 @Frequency 50.0 - 60.0 Hz | 3.17 @Frequency 50.0 - 60.0 Hz |
Dielectric Strength | 14.9 kV/mm @Thickness 3.20 mm | 378 kV/in @Thickness 0.126 in |
| 17.0 kV/mm @Thickness 3.20 mm | 432 kV/in @Thickness 0.126 in |
| 27.0 kV/mm @Thickness 1.60 mm | 686 kV/in @Thickness 0.0630 in |
| 35.0 kV/mm @Thickness 0.800 mm | 889 kV/in @Thickness 0.0315 in |
Dissipation Factor | 0.00090 @Frequency 50.0 - 60.0 Hz | 0.00090 @Frequency 50.0 - 60.0 Hz |
| 0.0010 @Frequency 50.0 - 60.0 Hz | 0.0010 @Frequency 50.0 - 60.0 Hz |
| 0.010 @Frequency 1e+6 Hz | 0.010 @Frequency 1e+6 Hz |
| 0.010 @Frequency 1e+6 Hz | 0.010 @Frequency 1e+6 Hz |
Comparative Tracking Index | 250 - 400 V | 250 - 400 V |
Hot Wire Ignition, HWI | 30 - 60 sec | 30 - 60 sec |
High Amp Arc Ignition, HAI | 60 - 120 arcs | 60 - 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | 25.4 - 80.0 mm/min | 1.00 - 3.15 in/min |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 68.4 µm/m-°C @Temperature -40.0 - 95.0 °C | 38.0 µin/in-°F @Temperature -40.0 - 203 °F |
| 70.0 µm/m-°C @Temperature 23.0 - 80.0 °C | 38.9 µin/in-°F @Temperature 73.4 - 176 °F |
Specific Heat Capacity | 1.25 J/g-°C | 0.299 BTU/lb-°F |
Thermal Conductivity | 0.190 W/m-K | 1.32 BTU-in/hr-ft²-°F |
| 0.200 W/m-K | 1.39 BTU-in/hr-ft²-°F |
Hot Ball Pressure Test | 125 °C | 257 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 133 °C | 271 °F |
| 137 °C @Thickness 6.40 mm | 279 °F @Thickness 0.252 in |
Deflection Temperature at 1.8 MPa (264 psi) | 121 °C | 250 °F |
| 126 °C @Thickness 3.20 mm | 259 °F @Thickness 0.126 in |
| 126 °C @Thickness 6.40 mm | 259 °F @Thickness 0.252 in |
Vicat Softening Point | 139 °C | 282 °F |
| 140 °C | 284 °F |
| 145 °C | 293 °F |
UL RTI, Electrical | 130 °C | 266 °F |
UL RTI, Mechanical with Impact | 130 °C | 266 °F |
UL RTI, Mechanical without Impact | 130 °C | 266 °F |
Flammability, UL94 | V-2 @Thickness 1.09 mm | V-2 @Thickness 0.0429 in |
Oxygen Index | 25 % | 25 % |
|
Optical Properties | Metric | English | Comments |
---|
Refractive Index | 1.586 | 1.586 |
Haze | 1.0 % @Thickness 2.54 mm | 1.0 % @Thickness 0.100 in |
Transmission, Visible | 88 % @Thickness 2.54 mm | 88 % @Thickness 0.100 in |
|
Processing Properties | Metric | English | Comments |
---|
Nozzle Temperature | 265 - 290 °C | 509 - 554 °F |
Zone 1 | 250 - 270 °C | 482 - 518 °F |
Zone 2 | 260 - 280 °C | 500 - 536 °F |
Zone 3 | 270 - 295 °C | 518 - 563 °F |
Melt Temperature | 270 - 295 °C | 518 - 563 °F |
Mold Temperature | 70.0 - 95.0 °C | 158 - 203 °F |
Drying Temperature | 120 °C | 248 °F |
Dry Time | 3.00 - 4.00 hour | 3.00 - 4.00 hour |
| 48.0 hour | 48.0 hour |
Moisture Content | 0.020 % | 0.020 % |
Back Pressure | 0.300 - 0.700 MPa | 43.5 - 102 psi |
Shot Size | 40 - 60 % | 40 - 60 % |
Vent Depth | 0.00250 - 0.00760 cm | 0.000984 - 0.00299 in |
Screw Speed | 40 - 70 rpm | 40 - 70 rpm |
|
Compliance Properties | Metric | English | Comments |
---|
USP Class VI | Yes | Yes |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.