|
Physical Properties | Original Value | Comments |
---|
Density | 1.59 g/cc @Temperature 23.0 °C |
Filler Content | 50 % |
Moisture Absorption | 1.1 % @Temperature 70.0 °C |
Water Absorption at Saturation | 3.5 - 4.0 % |
Viscosity | 8000 cP @Frequency 10000 Hz, Temperature 322 °C |
| 10000 cP @Frequency 10000 Hz, Temperature 307 °C |
| 15000 cP @Frequency 10000 Hz, Temperature 292 °C |
| 20000 cP @Frequency 10000 Hz, Temperature 277 °C |
| 30000 cP @Frequency 1000 Hz, Temperature 322 °C |
| 40000 cP @Frequency 1000 Hz, Temperature 307 °C |
| 50000 cP @Frequency 100 Hz, Temperature 277 °C |
| 70000 cP @Frequency 1000 Hz, Temperature 292 °C |
| 90000 cP @Frequency 10 Hz, Temperature 277 °C |
| 90000 cP @Frequency 100 Hz, Temperature 322 °C |
| 100000 cP @Frequency 1000 Hz, Temperature 277 °C |
| 110000 cP @Frequency 10 Hz, Temperature 322 °C |
| 120000 cP @Frequency 100 Hz, Temperature 307 °C |
| 130000 cP @Frequency 10 Hz, Temperature 307 °C |
| 135000 cP @Frequency 100 Hz, Temperature 292 °C |
| 160000 cP @Frequency 10 Hz, Temperature 292 °C |
Linear Mold Shrinkage, Flow | <= 0.0030 cm/cm |
Linear Mold Shrinkage, Transverse | 0.0050 cm/cm |
Melt Flow | 9.0 g/10 min @Load 5.00 kg, Temperature 275 °C |
Spiral Flow | 536 cm |
|
Mechanical Properties | Original Value | Comments |
---|
Ball Indentation Hardness | 290 MPa |
Tensile Strength at Break | 250 MPa |
| 125 MPa @Treatment Temp. 140 - 150 °C, Time 1.80e+7 sec |
| 125 MPa @Treatment Temp. 140 - 150 °C, Time 7.20e+7 sec |
Tensile Strength, Yield | 140 MPa @Temperature 80.0 °C |
| 255 MPa @Temperature 23.0 °C |
| 265 MPa @Temperature -20.0 °C |
Tensile Stress at Strain | 25.0 MPa @Strain 0.5 %, Temperature 60.0 °C |
| 30.0 MPa @Strain 0.5 %, Temperature 23.0 °C |
| 80.0 MPa @Strain 1 %, Temperature 120 °C |
| 100 MPa @Strain 1 %, Temperature 80.0 °C |
| 100 MPa @Strain 2 %, Temperature 120 °C |
| 120 MPa @Strain 4 %, Temperature 120 °C |
| 125 MPa @Strain 2 %, Temperature 80.0 °C |
| 130 MPa @Strain 6.0 %, Temperature 120 °C |
| 135 MPa @Strain 3 %, Temperature 80.0 °C |
| 135 MPa @Strain 1 %, Temperature 60.0 °C |
| 140 MPa @Strain 4 %, Temperature 80.0 °C |
| 145 MPa @Strain 8.0 %, Temperature 120 °C |
| 160 MPa @Strain 1 %, Temperature 23.0 °C |
| 180 MPa @Strain 2 %, Temperature 60.0 °C |
| 195 MPa @Strain 3 %, Temperature 60.0 °C |
| 235 MPa @Strain 2 %, Temperature 23.0 °C |
Elongation at Break | 3.0 % |
Creep Strength | 60.0 MPa @Strain 0.7 %, Time 360000 sec |
| 60.0 MPa @Time 360 sec, Strain 0.4 % |
| 60.0 MPa @Strain 0.5 %, Time 3600 sec |
| 60.0 MPa @Strain 0.6 %, Time 36000 sec |
| 90.0 MPa @Strain 0.6 %, Time 36000 sec |
| 90.0 MPa @Strain 0.65 %, Time 360000 sec |
| 90.0 MPa @Time 360 sec, Strain 0.5 % |
| 90.0 MPa @Strain 0.55 %, Time 3600 sec |
| 100 MPa @Strain 0.65 %, Time 3600 sec |
| 100 MPa @Strain 0.7 %, Time 36000 sec |
| 100 MPa @Strain 0.8 %, Time 360000 sec |
| 100 MPa @Strain 0.88 %, Time 3.60e+6 sec |
Tensile Modulus | 17500 MPa |
Flexural Strength | 380 MPa |
Flexural Modulus | 16400 MPa |
Charpy Impact Unnotched | 95.0 kJ/m² @Temperature -30.0 °C |
| 110 kJ/m² @Temperature 23.0 °C |
Charpy Impact, Notched | 15.0 kJ/m² @Temperature -30.0 °C |
| 17.0 kJ/m² @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 9.10e+13 ohm-cm |
Surface Resistance | 1.50e+17 ohm |
Dielectric Constant | 4.42 @Frequency 1e+6 Hz |
Comparative Tracking Index | 600 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 15.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
CTE, linear, Transverse to Flow | 65.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
Melting Point | 255 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 245 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 225 °C |
Vicat Softening Point | 242 °C @Load 5.10 kg |
Flammability, UL94 | HB @Thickness 0.800 mm |
Glow Wire Flammability Index | 700 °C @Thickness 1.60 mm |
|
Processing Properties | Original Value | Comments |
---|
Feed Temperature | 80.0 °C |
Nozzle Temperature | 290 - 310 °C |
Zone 1 | 275 - 305 °C |
Zone 2 | 275 - 305 °C |
Zone 3 | 275 - 305 °C |
Zone 4 | 275 - 305 °C |
Melt Temperature | 290 - 310 °C |
Mold Temperature | 80.0 - 120 °C |
Drying Temperature | 80.0 °C |
Dry Time | 4 - 8 hour |
Injection Pressure | 100 MPa |
Hold Pressure | 30.0 - 80.0 MPa |
Back Pressure | 0.500 - 1.50 MPa |
|
Descriptive Properties |
---|
Rate acc. FMVSS 302 (<100/min) | Passed |
Rate acc. FMVSS 302,(<100/min) | FMVSS 302, >1 [mm] Thickness |