|
Physical Properties | Original Value | Comments |
---|
Density | 1.14 g/cc |
Water Absorption | 1.4 % @Time 86400 sec |
Moisture Absorption at Equilibrium | 2.8 % |
Linear Mold Shrinkage, Flow | 0.018 cm/cm @Thickness 2.00 mm |
Linear Mold Shrinkage, Transverse | 0.018 cm/cm @Thickness 2.00 mm |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 40.0 MPa |
| 50.0 MPa |
Tensile Strength, Yield | 60.0 MPa |
| 86.0 MPa |
Elongation at Break | 27 % |
| >= 50 % |
Elongation at Yield | 5.0 % |
| 10 % |
Tensile Modulus | 1800 MPa |
| 3400 MPa |
Flexural Strength | 30.0 MPa |
| 90.0 MPa |
Flexural Modulus | 980 MPa |
| 2900 MPa |
Poissons Ratio | 0.40 |
Izod Impact, Notched (ISO) | 5.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature -30.0 °C |
| 6.00 kJ/m² @Temperature 23.0 °C |
| 30.0 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | NB @Temperature -30.0 °C |
| NB @Temperature -30.0 °C |
| NB @Temperature 23.0 °C |
| NB @Temperature 23.0 °C |
Charpy Impact, Notched | 5.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature -30.0 °C |
| 6.00 kJ/m² @Temperature 23.0 °C |
| 30.0 kJ/m² @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Dielectric Strength | 26.0 kV/mm @Thickness 1.00 mm |
Arc Resistance | 120 - 180 sec @Thickness 3.00 mm |
Comparative Tracking Index | 600 V @Thickness 3.00 mm |
Hot Wire Ignition, HWI | 7.0 - 15 sec @Thickness 0.750 mm |
| 15 - 30 sec @Thickness 1.50 mm |
| 15 - 30 sec @Thickness 3.00 mm |
High Amp Arc Ignition, HAI | >= 120 arcs @Thickness 0.750 mm |
| >= 120 arcs @Thickness 1.50 mm |
| >= 120 arcs @Thickness 3.00 mm |
High Voltage Arc-Tracking Rate, HVTR | 0.000 - 10.0 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 100 µm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
CTE, linear, Transverse to Flow | 100 µm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
Melting Point | 253 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 183 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 62.0 °C |
UL RTI, Electrical | 130 °C |
| 130 °C @Thickness 0.750 mm |
| 130 °C @Thickness 1.50 mm |
| 130 °C @Thickness 3.00 mm |
UL RTI, Mechanical with Impact | 75.0 °C @Thickness 0.400 mm |
| 75.0 °C @Thickness 0.750 mm |
| 75.0 °C @Thickness 1.50 mm |
| 75.0 °C @Thickness 3.00 mm |
UL RTI, Mechanical without Impact | 75.0 °C @Thickness 0.400 mm |
| 85.0 °C @Thickness 0.750 mm |
| 85.0 °C @Thickness 1.50 mm |
| 85.0 °C @Thickness 3.00 mm |
Flammability, UL94 | V-2 @Thickness 0.400 mm |
| V-2 @Thickness 0.750 mm |
| V-2 @Thickness 1.50 mm |
| V-2 @Thickness 3.00 mm |
Oxygen Index | 28 % |
Glow Wire Ignition Temperature | 700 °C @Thickness 0.750 mm |
| 700 °C @Thickness 1.50 mm |
| 700 °C @Thickness 3.00 mm |
Glow Wire Flammability Index | 800 °C @Thickness 0.750 mm |
| 800 °C @Thickness 1.50 mm |
| 930 °C @Thickness 3.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Rear Barrel Temperature | 250 - 270 °C |
Middle Barrel Temperature | 260 - 275 °C |
Front Barrel Temperature | 270 - 280 °C |
Nozzle Temperature | 270 - 290 °C |
Melt Temperature | 275 - 290 °C |
Mold Temperature | 65.0 - 95.0 °C |
Drying Temperature | <= 70.0 °C @Time 3600 - 10800 sec |
|
Compliance Properties | Original Value | Comments |
---|
European Food 1935/2004 | Yes |
FDA | Yes |
|
Descriptive Properties |
---|
Agency Ratings | EU 10/2011 |
| EU 2023/2006 |
| FED L-P-410A |
Features | Fast Molding Cycle |
| General Purpose |
| Good Mold Release |
| Good Stiffness |
| High Rigidity |
| Lubricated |
| Nucleated |
Suggested Max Regrind (%) | 25 |
Uses | Bearings |
| Cams |
| Connectors |
| Fasteners |
| General Purpose |
| Housings |
| Industrial Applications |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.