|
Physical Properties | Original Value | Comments |
---|
Specific Gravity | 1.40 g/cc |
| 1.40 g/cc |
Density | 1.40 g/cc |
Water Absorption | 0.36 % |
Moisture Absorption | 0.0800 % |
Viscosity | 260 cP @Shear Rate 1500 1/s, Temperature 260 °C |
Linear Mold Shrinkage, Flow | 0.011 - 0.018 cm/cm |
| 0.0090 - 0.016 cm/cm @Thickness 0.750 - 2.30 mm |
| 0.015 - 0.023 cm/cm @Thickness 3.20 mm |
| 0.015 - 0.023 cm/cm @Thickness 2.30 - 4.60 mm |
Linear Mold Shrinkage, Transverse | 0.0090 - 0.019 cm/cm |
| 0.010 - 0.017 cm/cm @Thickness 0.750 - 2.30 mm |
| 0.016 - 0.024 cm/cm @Thickness 2.30 - 4.60 mm |
Melt Flow | 8.0 g/10 min @Load 2.16 kg, Temperature 250 °C |
| 8.6 g/10 min @Load 2.16 kg, Temperature 250 °C |
| 15 g/10 min @Load 5.00 kg, Temperature 250 °C |
| 30 g/10 min @Load 5.00 kg, Temperature 265 °C |
| 33 g/10 min @Load 5.00 kg, Temperature 265 °C |
| 33 g/10 min @Load 5.00 kg, Temperature 266 °C |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell R | 120 |
Ball Indentation Hardness | 105 MPa |
Tensile Strength at Break | 40.0 MPa |
| 52.0 MPa |
Tensile Strength, Yield | 58.0 MPa |
| 58.0 MPa |
Elongation at Break | 18 % |
| 18 % |
Elongation at Yield | 5.0 % |
| 5.0 % |
Tensile Modulus | 2800 MPa |
| 2820 MPa |
Flexural Yield Strength | 90.0 MPa |
| 101 MPa |
Flexural Modulus | 2600 MPa |
| 2620 MPa |
Izod Impact, Notched | 40.0 J/m |
| 25.0 J/m @Temperature -30.0 °C |
| 45.0 J/m @Temperature 0.000 °C |
Izod Impact, Unnotched | NB |
| NB @Temperature -30.0 °C |
Izod Impact, Notched (ISO) | 5.00 kJ/m² |
| 4.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature 0.000 °C |
Izod Impact, Unnotched (ISO) | NB |
| NB @Temperature -30.0 °C |
Charpy Impact Unnotched | NB |
| NB |
| NB @Temperature -30.0 °C |
| NB @Temperature -30.0 °C |
Charpy Impact, Notched | 5.00 kJ/m² |
| 8.00 kJ/m² |
| 4.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature -30.0 °C |
Dart Drop, Total Energy | 200 J |
Taber Abrasion, mg/1000 Cycles | 19 |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | >= 1.00e+15 ohm-cm |
| >= 1.00e+15 ohm-cm |
Surface Resistance | >= 1.00e+15 ohm |
Dielectric Constant | 2.8 @Frequency 1e+6 Hz |
| 2.9 @Frequency 50.0 - 60.0 Hz |
| 3.0 @Frequency 1e+6 Hz |
| 3.1 @Frequency 100 Hz |
Dielectric Strength | 17.0 kV/mm @Thickness 3.20 mm |
| 18.0 kV/mm @Thickness 3.20 mm |
| 18.0 kV/mm @Thickness 1.00 mm |
| 18.4 kV/mm @Thickness 3.20 mm |
| 24.0 kV/mm @Thickness 1.60 mm |
| 25.0 kV/mm @Thickness 1.60 mm |
| 35.0 kV/mm @Thickness 0.800 mm |
Dissipation Factor | 0.0010 @Frequency 50.0 - 60.0 Hz |
| 0.0020 @Frequency 100 Hz |
| 0.0125 @Frequency 1e+6 Hz |
| 0.015 @Frequency 1e+6 Hz |
Arc Resistance | 0.00 - 60 sec |
| 60 - 120 sec |
Comparative Tracking Index | 100 V |
| 175 V |
| 175 - 250 V |
Hot Wire Ignition, HWI | 30 - 60 sec |
High Amp Arc Ignition, HAI | >= 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | >= 150 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 76.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 79.2 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 100 µm/m-°C @Temperature 23.0 - 60.0 °C |
| 131 µm/m-°C @Temperature 60.0 - 138 °C |
CTE, linear, Transverse to Flow | 73.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 79.2 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 100 µm/m-°C @Temperature 23.0 - 60.0 °C |
Thermal Conductivity | 0.240 W/m-K |
Hot Ball Pressure Test | 125 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 150 °C |
| 160 °C @Thickness 3.20 mm |
| 162 °C @Thickness 6.40 mm |
Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C |
| 73.0 °C |
| 71.0 °C @Thickness 6.40 mm |
| 74.0 °C @Thickness 3.20 mm |
Vicat Softening Point | 170 °C |
| 170 °C |
| 170 °C |
| 212 °C |
| 212 °C |
UL RTI, Electrical | 120 °C |
UL RTI, Mechanical with Impact | 120 °C |
UL RTI, Mechanical without Impact | 140 °C |
Flammability, UL94 | V-0 @Thickness 0.710 mm |
| 5VA @Thickness 3.00 mm |
Oxygen Index | 30 % |
Glow Wire Test | 960 °C @Thickness 1.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Nozzle Temperature | 240 - 255 °C |
Zone 1 | 230 - 250 °C |
Zone 2 | 240 - 255 °C |
Zone 3 | 245 - 260 °C |
Melt Temperature | 245 - 260 °C |
Mold Temperature | 50.0 - 75.0 °C |
Drying Temperature | 120 °C |
Dry Time | 3.00 - 4.00 hour |
| 12.0 hour |
Moisture Content | 0.020 % |
Back Pressure | 0.300 - 0.700 MPa |
Shot Size | 40 - 80 % |
Vent Depth | 0.00130 - 0.00250 cm |
Screw Speed | 50 - 100 rpm |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.