(Viewing data as-entered. Click here to return)
|
Physical Properties | Original Value | Comments |
---|
Specific Gravity | 1.38 g/cc |
Density | 1.38 g/cc |
Filler Content | 20 % |
Water Absorption | 0.76 % |
Moisture Absorption | 0.270 % |
Viscosity | 175 cP @Shear Rate 1500 1/s, Temperature 260 °C |
Linear Mold Shrinkage, Flow | 0.0020 - 0.0040 cm/cm |
| 0.0030 - 0.0060 cm/cm @Thickness 3.20 mm |
Linear Mold Shrinkage, Transverse | 0.0040 - 0.0080 cm/cm |
Melt Flow | 17 g/10 min @Load 3.80 kg, Temperature 200 °C |
| 17 g/10 min @Load 5.00 kg, Temperature 250 °C |
| 30 g/10 min @Load 5.00 kg, Temperature 265 °C |
| 35 g/10 min @Load 5.00 kg, Temperature 265 °C |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell R | 118 |
Ball Indentation Hardness | 130 MPa |
Tensile Strength at Break | 105 MPa |
| 105 MPa |
Tensile Strength, Yield | 105 MPa |
| 105 MPa |
Elongation at Break | 3.0 % |
| 3.0 % |
Elongation at Yield | 3.0 % |
| 3.0 % |
Tensile Modulus | 7200 MPa |
| 7200 MPa |
Flexural Strength | 155 MPa |
| 160 MPa |
Flexural Yield Strength | 155 MPa |
| 160 MPa |
Flexural Modulus | 5500 MPa |
| 5700 MPa |
Flexural Strain at Break | 4.0 % |
Izod Impact, Notched | 80.0 J/m |
| 70.0 J/m @Temperature -30.0 °C |
| 75.0 J/m @Temperature 0.000 °C |
Izod Impact, Unnotched | 680 J/m |
| 605 J/m @Temperature -30.0 °C |
Izod Impact, Notched (ISO) | 7.00 kJ/m² |
| 7.00 kJ/m² @Temperature -30.0 °C |
| 7.00 kJ/m² @Temperature 0.000 °C |
Izod Impact, Unnotched (ISO) | 45.0 kJ/m² |
| 40.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact Unnotched | 45.0 kJ/m² |
| 55.0 kJ/m² |
| 40.0 kJ/m² @Temperature -30.0 °C |
| 40.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact, Notched | 6.00 kJ/m² |
| 10.0 kJ/m² |
| 5.00 kJ/m² @Temperature -30.0 °C |
| 8.00 kJ/m² @Temperature -30.0 °C |
Dart Drop, Total Energy | 50.0 J |
Taber Abrasion, mg/1000 Cycles | 80 |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | >= 1.00e+15 ohm-cm |
| >= 1.00e+15 ohm-cm |
Surface Resistance | >= 1.00e+15 ohm |
Dielectric Constant | 3.4 @Frequency 1e+6 Hz |
| 3.4 @Frequency 50.0 - 60.0 Hz |
| 3.4 @Frequency 1e+6 Hz |
Dielectric Strength | 24.0 kV/mm @Thickness 3.20 mm |
| 24.0 kV/mm @Thickness 3.20 mm |
| 28.0 kV/mm @Thickness 1.60 mm |
| 28.0 kV/mm @Thickness 1.60 mm |
Dissipation Factor | 0.0024 @Frequency 50.0 - 60.0 Hz |
| 0.020 @Frequency 1e+6 Hz |
| 0.020 @Frequency 1e+6 Hz |
Comparative Tracking Index | 400 - 600 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 23.8 µm/m-°C @Temperature 23.0 - 150 °C |
| 28.6 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 30.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 30.0 µm/m-°C @Temperature 23.0 - 60.0 °C |
CTE, linear, Transverse to Flow | 76.7 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 105 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 105 µm/m-°C @Temperature 23.0 - 60.0 °C |
| 157 µm/m-°C @Temperature 23.0 - 150 °C |
Thermal Conductivity | 0.250 W/m-K |
Hot Ball Pressure Test | 125 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 209 °C |
| 210 °C |
| 210 °C @Thickness 3.20 mm |
Deflection Temperature at 1.8 MPa (264 psi) | 170 °C |
| 179 °C |
| 170 °C @Thickness 3.20 mm |
Vicat Softening Point | 165 °C |
| 170 °C |
| 170 °C |
| 220 °C |
| 220 °C |
Flammability, UL94 | HB @Thickness 1.60 mm |
Glow Wire Test | 750 °C @Thickness 1.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 40.0 - 60.0 °C |
Nozzle Temperature | 240 - 260 °C |
Zone 1 | 230 - 245 °C |
Zone 2 | 240 - 255 °C |
Zone 3 | 245 - 265 °C |
Melt Temperature | 250 - 270 °C |
Mold Temperature | 40.0 - 100 °C |
Drying Temperature | 110 - 120 °C |
Dry Time | 2.00 - 4.00 hour |
Moisture Content | 0.020 % |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.