|
Physical Properties | Original Value | Comments |
---|
Specific Gravity | 1.39 g/cc |
Density | 1.39 g/cc |
Filler Content | 20 % |
Water Absorption | 0.10 % |
Moisture Absorption | 0.0600 % |
Viscosity | 215 cP @Shear Rate 1500 1/s, Temperature 260 °C |
Linear Mold Shrinkage, Flow | 0.0030 - 0.0080 cm/cm |
| 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm |
Linear Mold Shrinkage, Transverse | 0.0050 - 0.0090 cm/cm |
Melt Flow | 13 g/10 min @Load 2.16 kg, Temperature 250 °C |
| 16 g/10 min @Load 2.16 kg, Temperature 250 °C |
| 28 g/10 min @Load 5.00 kg, Temperature 250 °C |
| 40 g/10 min @Load 5.00 kg, Temperature 265 °C |
| 50 g/10 min @Load 5.00 kg, Temperature 266 °C |
| 50 g/10 min @Load 5.00 kg, Temperature 265 °C |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell R | 122 |
Ball Indentation Hardness | 205 MPa |
Tensile Strength at Break | 110 MPa |
| 125 MPa |
Tensile Strength, Yield | 110 MPa |
| 125 MPa |
Elongation at Break | 3.0 % |
| 3.0 % |
Elongation at Yield | 3.0 % |
| 3.0 % |
Tensile Modulus | 7100 MPa |
| 7300 MPa |
Flexural Strength | 150 MPa |
Flexural Yield Strength | 145 MPa |
| 150 MPa |
Flexural Modulus | 5800 MPa |
| 6300 MPa |
Flexural Strain at Break | 3.0 % |
Izod Impact, Notched | 80.0 J/m |
| 80.0 J/m @Temperature -30.0 °C |
| 80.0 J/m @Temperature 0.000 °C |
Izod Impact, Unnotched | 650 J/m |
| 645 J/m @Temperature -30.0 °C |
Izod Impact, Notched (ISO) | 7.00 kJ/m² |
| 6.00 kJ/m² @Temperature -30.0 °C |
| 7.00 kJ/m² @Temperature 0.000 °C |
Izod Impact, Unnotched (ISO) | 40.0 kJ/m² |
| 35.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact Unnotched | 40.0 kJ/m² |
| 55.0 kJ/m² |
| 40.0 kJ/m² @Temperature -30.0 °C |
| 50.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact, Notched | 6.00 kJ/m² |
| 9.00 kJ/m² |
| 5.00 kJ/m² @Temperature -30.0 °C |
| 9.00 kJ/m² @Temperature -30.0 °C |
Dart Drop, Total Energy | 65.0 J |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | >= 1.00e+15 ohm-cm |
| >= 1.00e+16 ohm-cm |
Surface Resistance | >= 1.00e+16 ohm |
Dielectric Constant | 3.1 @Frequency 50.0 - 60.0 Hz |
| 3.3 @Frequency 1e+6 Hz |
| 3.3 @Frequency 1e+6 Hz |
| 3.3 @Frequency 100 Hz |
Dielectric Strength | 16.0 kV/mm @Thickness 3.20 mm |
| 16.0 kV/mm @Thickness 3.20 mm |
| 28.0 kV/mm @Thickness 1.60 mm |
| 28.0 kV/mm @Thickness 1.60 mm |
| 31.0 kV/mm @Thickness 0.800 mm |
| 31.0 kV/mm @Thickness 0.800 mm |
Dissipation Factor | 0.0010 @Frequency 100 Hz |
| 0.0010 @Frequency 50.0 - 60.0 Hz |
| 0.014 @Frequency 1e+6 Hz |
| 0.014 @Frequency 1e+6 Hz |
Comparative Tracking Index | 100 V |
| 250 V |
Hot Wire Ignition, HWI | >= 120 sec |
High Amp Arc Ignition, HAI | >= 120 arcs |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 24.3 µm/m-°C @Temperature 23.0 - 150 °C |
| 24.9 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 40.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 40.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
| 40.0 µm/m-°C @Temperature 23.0 - 60.0 °C |
CTE, linear, Transverse to Flow | 68.7 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 100 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 100 µm/m-°C @Temperature 23.0 - 60.0 °C |
| 100 µm/m-°C @Temperature 23.0 - 80.0 °C |
| 112 µm/m-°C @Temperature 23.0 - 150 °C |
Hot Ball Pressure Test | 125 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 180 °C |
| 180 °C @Thickness 3.20 mm |
Deflection Temperature at 1.8 MPa (264 psi) | 120 °C |
| 120 °C @Thickness 3.20 mm |
Vicat Softening Point | 145 °C |
| 145 °C |
| 145 °C |
| 200 °C |
| 200 °C |
Flammability, UL94 | HB @Thickness 1.50 mm |
| HB @Thickness 3.00 mm |
Oxygen Index | 23 % |
Glow Wire Test | 750 °C @Thickness 1.00 mm |
| 850 °C @Thickness 2.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 40.0 - 60.0 °C |
Nozzle Temperature | 240 - 260 °C |
Zone 1 | 230 - 245 °C |
Zone 2 | 240 - 255 °C |
Zone 3 | 245 - 265 °C |
Melt Temperature | 250 - 270 °C |
Mold Temperature | 40.0 - 100 °C |
Drying Temperature | 110 - 120 °C |
Dry Time | 2.00 - 4.00 hour |
Moisture Content | 0.020 % |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.