|
Physical Properties | Original Value | Comments |
---|
Specific Gravity | 1.31 g/cc |
Density | 1.31 g/cc |
Water Absorption | 0.090 % @Temperature 22.8 °C |
Viscosity Test | 75 cm³/g |
Linear Mold Shrinkage, Flow | 0.018 - 0.020 in/in |
| 0.018 - 0.020 cm/cm |
Melt Flow | 65 g/10 min |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell M | 75 |
Tensile Strength, Yield | 60.0 MPa |
| 8300 psi @Temperature 22.8 °C |
Tensile Stress at Strain | 8.62 MPa @Strain 0.32 %, Temperature 23.0 °C |
| 16.8 MPa @Strain 0.64 %, Temperature 23.0 °C |
| 24.6 MPa @Strain 0.96 %, Temperature 23.0 °C |
| 31.8 MPa @Strain 1.28 %, Temperature 23.0 °C |
| 38.2 MPa @Strain 1.6 %, Temperature 23.0 °C |
| 43.6 MPa @Strain 1.92 %, Temperature 23.0 °C |
| 47.6 MPa @Strain 2.24 %, Temperature 23.0 °C |
| 49.8 MPa @Strain 2.56 %, Temperature 23.0 °C |
| 50.8 MPa @Strain 2.88 %, Temperature 23.0 °C |
| 51.1 MPa @Strain 3.2 %, Temperature 23.0 °C |
Elongation at Break | 30 % |
| 5.0 % @Temperature 22.8 °C |
Elongation at Yield | 4.0 % |
Tensile Modulus | 2700 MPa |
Flexural Strength | 85.0 MPa |
| 12400 psi @Temperature 22.8 °C |
Flexural Modulus | 2600 MPa |
| 360000 psi @Temperature 22.8 °C |
Shear Modulus | 0.0181 GPa @Temperature 220 °C |
| 0.0380 GPa @Temperature 210 °C |
| 0.0481 GPa @Temperature 200 °C |
| 0.0552 GPa @Temperature 190 °C |
| 0.0623 GPa @Temperature 180 °C |
| 0.0682 GPa @Temperature 170 °C |
| 0.0739 GPa @Temperature 160 °C |
| 0.0796 GPa @Temperature 150 °C |
| 0.0861 GPa @Temperature 140 °C |
| 0.0935 GPa @Temperature 130 °C |
| 0.101 GPa @Temperature 120 °C |
| 0.111 GPa @Temperature 110 °C |
| 0.122 GPa @Temperature 100 °C |
| 0.139 GPa @Temperature 90.0 °C |
| 0.168 GPa @Temperature 80.0 °C |
| 0.220 GPa @Temperature 70.0 °C |
| 0.334 GPa @Temperature 60.0 °C |
| 0.572 GPa @Temperature 50.0 °C |
| 0.734 GPa @Temperature 40.0 °C |
| 0.773 GPa @Temperature 30.0 °C |
| 0.797 GPa @Temperature 23.0 °C |
| 0.832 GPa @Temperature 10.0 °C |
| 0.855 GPa @Temperature 0.000 °C |
| 0.879 GPa @Temperature -10.0 °C |
| 0.904 GPa @Temperature -20.0 °C |
| 0.930 GPa @Temperature -30.0 °C |
| 0.961 GPa @Temperature -40.0 °C |
| 0.986 GPa @Temperature -50.0 °C |
| 1.07 GPa @Temperature -60.0 °C |
Izod Impact, Notched | 0.700 ft-lb/in @Temperature 22.8 °C |
Izod Impact, Notched (ISO) | 3.20 kJ/m² |
Charpy Impact Unnotched | 100 kJ/m² |
| 90.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact, Notched | 4.00 kJ/m² |
| 3.50 kJ/m² @Temperature -30.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | >= 1.00e+13 ohm-cm |
| 1.00e+16 ohm-cm |
Surface Resistance | >= 1.00e+15 ohm |
Dielectric Constant | 3.2 @Frequency 1e+6 Hz |
| 3.5 @Frequency 1e+6 Hz |
| 4.0 @Frequency 100 Hz |
Dielectric Strength | 23.0 kV/mm |
| 420 V/mil |
Dissipation Factor | 0.0015 @Frequency 100 Hz |
| 0.0020 @Frequency 1e+6 Hz |
| 0.020 @Frequency 1e+6 Hz |
Comparative Tracking Index | 600 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 110 µm/m-°C |
CTE, linear, Transverse to Flow | 86.0 µm/m-°C |
Melting Point | 225 °C |
| 437 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 155 °C |
| 324 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C |
| 123 °F |
Vicat Softening Point | 190 °C |
Glass Transition Temp, Tg | 60.0 °C |
Flammability, UL94 | HB @Thickness 0.710 mm |
Oxygen Index | 22 % |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 20.0 - 50.0 °C |
| 65.0 - 93.0 °C |
Feed Temperature | 230 - 240 °C |
Zone 1 | 230 - 240 °C |
Zone 2 | 235 - 250 °C |
Zone 3 | 235 - 250 °C |
Zone 4 | 240 - 260 °C |
Die Temperature | 250 - 260 °C |
Melt Temperature | 243 °C |
| 235 - 260 °C |
Mold Temperature | 82.0 °C |
Injection Velocity | 300 mm/sec |
Drying Temperature | 120 - 130 °C |
Dry Time | 4 hour |
Moisture Content | 0.020 % |
Injection Pressure | 48.0 MPa |
Hot-Working Temperature | 250 - 260 °C |
|
Descriptive Properties |
---|
Injection molding | Yes |
Injection speed | medium-fast |
Processing conditions acc. ISO | 7792-2 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.