|
Physical Properties | Metric | English | Comments |
---|
Density | 1.30 g/cc | 0.0470 lb/in³ |
Water Absorption at Saturation | 0.45 % @Temperature 23.0 °C | 0.45 % @Temperature 73.4 °F |
| 0.55 % @Temperature 100 °C | 0.55 % @Temperature 212 °F |
Viscosity | 300000 cP @Temperature 400 °C | 300000 cP @Temperature 752 °F |
Linear Mold Shrinkage, Flow | 0.010 cm/cm | 0.010 in/in |
Linear Mold Shrinkage, Transverse | 0.013 cm/cm | 0.013 in/in |
Spiral Flow | 12.0 cm @Thickness 1.00 mm | 4.72 in @Thickness 0.0394 in |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore D | 84.5 | 84.5 |
Tensile Strength, Yield | 98.0 MPa | 14200 psi |
Elongation at Break | 45 % | 45 % |
Tensile Modulus | 4.00 GPa | 580 ksi |
Flexural Strength | 12.5 MPa @Temperature 275 °C | 1810 psi @Temperature 527 °F |
| 19.0 MPa @Temperature 175 °C | 2760 psi @Temperature 347 °F |
| 85.0 MPa @Temperature 125 °C | 12300 psi @Temperature 257 °F |
| 165 MPa @Temperature 23.0 °C | 23900 psi @Temperature 73.4 °F |
| 125 MPa @Strain 3.5 %, Temperature 23.0 °C | 18100 psi @Strain 3.5 %, Temperature 73.4 °F |
Flexural Modulus | 4.00 GPa | 580 ksi |
Izod Impact, Notched (ISO) | 7.00 kJ/m² @Temperature 23.0 °C | 3.33 ft-lb/in² @Temperature 73.4 °F |
Izod Impact, Unnotched (ISO) | NB @Temperature 23.0 °C | NB @Temperature 73.4 °F |
Charpy Impact Unnotched | NB @Temperature 23.0 °C | NB @Temperature 73.4 °F |
Charpy Impact, Notched | 0.600 J/cm² @Temperature 23.0 °C | 2.86 ft-lb/in² @Temperature 73.4 °F |
Compression Set | 70 % @Temperature 120 °C | 70 % @Temperature 248 °F |
| 125 % @Temperature 23.0 °C | 125 % @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+9 ohm-cm @Temperature 275 °C | 1.00e+9 ohm-cm @Temperature 527 °F |
| 1.00e+15 ohm-cm @Temperature 125 °C | 1.00e+15 ohm-cm @Temperature 257 °F |
| 1.00e+16 ohm-cm @Temperature 23.0 °C | 1.00e+16 ohm-cm @Temperature 73.4 °F |
Dielectric Constant | 3.2 @Frequency 50000 Hz, Temperature 23.0 °C | 3.2 @Frequency 50000 Hz, Temperature 73.4 °F |
| 4.5 @Frequency 50 Hz, Temperature 200 °C | 4.5 @Frequency 50 Hz, Temperature 392 °F |
Dielectric Strength | 23.0 kV/mm @Thickness 2.00 mm | 584 kV/in @Thickness 0.0787 in |
| 190 kV/mm @Thickness 0.0500 mm | 4830 kV/in @Thickness 0.00197 in |
Dissipation Factor | 0.0030 @Frequency 1e+6 Hz | 0.0030 @Frequency 1e+6 Hz |
Comparative Tracking Index | 150 V | 150 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 45.0 µm/m-°C @Temperature <=143 °C | 25.0 µin/in-°F @Temperature <=289 °F |
| 120 µm/m-°C @Temperature >=143 °C | 66.7 µin/in-°F @Temperature >=289 °F |
CTE, linear, Transverse to Flow | 55.0 µm/m-°C @Temperature <=143 °C | 30.6 µin/in-°F @Temperature <=289 °F |
| 140 µm/m-°C @Temperature >=143 °C | 77.8 µin/in-°F @Temperature >=289 °F |
Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F |
| 0.320 W/m-K | 2.22 BTU-in/hr-ft²-°F |
Melting Point | 343 °C | 649 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 152 °C | 306 °F |
| 160 °C @Treatment Temp. 200 °C, Time 14400 sec | 320 °F @Treatment Temp. 392 °F, Time 4.00 hour |
Glass Transition Temp, Tg | 143 °C | 289 °F |
| 150 °C | 302 °F |
UL RTI, Electrical | 260 °C | 500 °F |
UL RTI, Mechanical with Impact | 180 °C | 356 °F |
UL RTI, Mechanical without Impact | 240 °C | 464 °F |
Glow Wire Flammability Index | 960 °C @Thickness 2.00 mm | 1760 °F @Thickness 0.0787 in |
|
Processing Properties | Metric | English | Comments |
---|
Processing Temperature | <= 100 °C | <= 212 °F |
Zone 1 | 350 °C | 662 °F |
Zone 2 | 355 °C | 671 °F |
Zone 3 | 360 °C | 680 °F |
Zone 4 | 365 °C | 689 °F |
Zone 5 | 370 °C | 698 °F |
Mold Temperature | 170 - 200 °C | 338 - 392 °F |
Dry Time | 3.00 - 5.00 hour @Temperature 120 - 150 °C | 3.00 - 5.00 hour @Temperature 248 - 302 °F |
|
Descriptive Properties |
---|
Gate | >1 mm or 0.5 x part thickness |
Runner | >3.5mm |
| >3mm |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.