|
Physical Properties | Metric | English | Comments |
---|
Density | 1.43 g/cc | 0.0517 lb/in³ |
Moisture Absorption at Equilibrium | 0.80 - 1.2 % | 0.80 - 1.2 % |
Water Absorption at Saturation | 4.3 - 5.3 % | 4.3 - 5.3 % |
Viscosity Measurement | 130 | 130 |
Linear Mold Shrinkage | 0.0033 cm/cm | 0.0033 in/in |
|
Mechanical Properties | Metric | English | Comments |
---|
Tensile Strength | 40.0 MPa @Strain 2 %, Temperature 150 °C | 5800 psi @Strain 2 %, Temperature 302 °F |
| 50.0 MPa @Strain 2 %, Temperature 100 °C | 7250 psi @Strain 2 %, Temperature 212 °F |
| 100 MPa @Strain 2 %, Temperature 80.0 °C | 14500 psi @Strain 2 %, Temperature 176 °F |
| 110 MPa @Strain 1 %, Temperature 60.0 °C | 16000 psi @Strain 1 %, Temperature 140 °F |
| 120 MPa @Strain 3 %, Temperature 80.0 °C | 17400 psi @Strain 3 %, Temperature 176 °F |
| 160 MPa @Strain 2 %, Temperature 60.0 °C | 23200 psi @Strain 2 %, Temperature 140 °F |
| 175 MPa @Strain 1 %, Temperature 23.0 °C | 25400 psi @Strain 1 %, Temperature 73.4 °F |
| 200 MPa @Strain 2 %, Temperature 23.0 °C | 29000 psi @Strain 2 %, Temperature 73.4 °F |
Tensile Strength, Yield | 210 MPa | 30500 psi |
Tensile Stress at Strain | 60.0 MPa @Strain 6.0 %, Temperature 150 °C | 8700 psi @Strain 6.0 %, Temperature 302 °F |
| 65.0 MPa @Strain 9.0 %, Temperature 150 °C | 9430 psi @Strain 9.0 %, Temperature 302 °F |
| 75.0 MPa @Strain 6.0 %, Temperature 100 °C | 10900 psi @Strain 6.0 %, Temperature 212 °F |
| 80.0 MPa @Strain 9.0 %, Temperature 100 °C | 11600 psi @Strain 9.0 %, Temperature 212 °F |
| 125 MPa @Strain 5.0 %, Temperature 80.0 °C | 18100 psi @Strain 5.0 %, Temperature 176 °F |
Elongation at Yield | 3.0 % | 3.0 % |
Modulus of Elasticity | 12.0 GPa | 1740 ksi |
| 5.00 GPa @Temperature 140 °C | 725 ksi @Temperature 284 °F |
| 9.00 GPa @Temperature 80.0 °C | 1310 ksi @Temperature 176 °F |
| 12.0 GPa @Temperature 0.000 °C | 1740 ksi @Temperature 32.0 °F |
| 12.0 GPa @Temperature 40.0 °C | 1740 ksi @Temperature 104 °F |
Charpy Impact Unnotched | 10.0 J/cm² @Temperature 23.0 °C | 47.6 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 1.70 J/cm² @Temperature 23.0 °C | 8.09 ft-lb/in² @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm |
| 2.00e+9 ohm-cm @Temperature 140 °C | 2.00e+9 ohm-cm @Temperature 284 °F |
| 6.00e+10 ohm-cm @Temperature 120 °C | 6.00e+10 ohm-cm @Temperature 248 °F |
| 1.00e+13 ohm-cm @Temperature 100 °C | 1.00e+13 ohm-cm @Temperature 212 °F |
| 1.00e+15 ohm-cm @Temperature 80.0 °C | 1.00e+15 ohm-cm @Temperature 176 °F |
| 5.00e+15 ohm-cm @Temperature 60.0 °C | 5.00e+15 ohm-cm @Temperature 140 °F |
| 5.00e+15 ohm-cm @Temperature 20.0 °C | 5.00e+15 ohm-cm @Temperature 68.0 °F |
| 1.00e+16 ohm-cm @Temperature 40.0 °C | 1.00e+16 ohm-cm @Temperature 104 °F |
Dielectric Constant | 4.2 @Frequency 1e+6 Hz | 4.2 @Frequency 1e+6 Hz |
Dissipation Factor | 0.020 @Frequency 1e+6 Hz | 0.020 @Frequency 1e+6 Hz |
Comparative Tracking Index | 600 V | 600 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 50.0 - 60.0 µm/m-°C @Temperature 23.0 - 80.0 °C | 27.8 - 33.3 µin/in-°F @Temperature 73.4 - 176 °F |
CTE, linear, Transverse to Flow | 15.0 µm/m-°C @Temperature 23.0 - 80.0 °C | 8.33 µin/in-°F @Temperature 73.4 - 176 °F |
Specific Heat Capacity | 1.30 J/g-°C | 0.311 BTU/lb-°F |
Thermal Conductivity | 0.280 W/m-K | 1.94 BTU-in/hr-ft²-°F |
Melting Point | 295 °C | 563 °F |
Maximum Service Temperature, Air | 135 °C | 275 °F |
| 160 °C | 320 °F |
| 270 °C | 518 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 245 °C | 473 °F |
Flammability, UL94 | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 310 - 330 °C | 590 - 626 °F |
Mold Temperature | 80.0 - 120 °C | 176 - 248 °F |
|
Descriptive Properties |
---|
Commercial Status | Europe |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.