|
Physical Properties | Metric | English | Comments |
---|
Density | 1.26 g/cc | 0.0455 lb/in³ |
Melt Density | 1.11 g/cc @Temperature 245 °C | 0.0401 lb/in³ @Temperature 473 °F |
Water Absorption | 0.30 % @Time 86400 sec | 0.30 % @Time 24.0 hour |
| 0.60 % @Thickness 2.00 mm | 0.60 % @Thickness 0.0787 in |
Moisture Absorption | 0.200 % @Thickness 2.00 mm | 0.200 % @Thickness 0.0787 in |
Linear Mold Shrinkage, Flow | 0.016 cm/cm | 0.016 in/in |
Linear Mold Shrinkage, Transverse | 0.016 cm/cm | 0.016 in/in |
Melt Flow | 12 g/10 min @Load 2.16 kg, Temperature 240 °C | 12 g/10 min @Load 4.76 lb, Temperature 464 °F |
| 13 g/10 min @Load 2.16 kg, Temperature 240 °C | 13 g/10 min @Load 4.76 lb, Temperature 464 °F |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore D | 64 | 64 |
| <= 68 | <= 68 |
Tensile Stress at Strain | 14.0 MPa @Strain 5.0 % | 2030 psi @Strain 5.0 % |
| 23.0 MPa @Strain 10 % | 3340 psi @Strain 10 % |
| 24.0 MPa @Strain 50 % | 3480 psi @Strain 50 % |
Tensile Modulus | 0.550 GPa | 79.8 ksi |
Flexural Modulus | 0.550 GPa | 79.8 ksi |
Poissons Ratio | 0.47 | 0.47 |
Izod Impact, Notched (ISO) | 7.00 kJ/m² @Temperature -40.0 °C | 3.33 ft-lb/in² @Temperature -40.0 °F |
| 38.0 kJ/m² @Temperature 23.0 °C | 18.1 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 0.700 J/cm² @Temperature -40.0 °C | 3.33 ft-lb/in² @Temperature -40.0 °F |
| 0.800 J/cm² @Temperature -30.0 °C | 3.81 ft-lb/in² @Temperature -22.0 °F |
| 3.60 J/cm² @Temperature 23.0 °C | 17.1 ft-lb/in² @Temperature 73.4 °F |
Tensile Impact Strength | 300 kJ/m² @Temperature 23.0 °C | 143 ft-lb/in² @Temperature 73.4 °F |
Tensile Creep Modulus, 1 hour | 360 MPa | 52200 psi |
Tensile Creep Modulus, 1000 hours | 310 MPa | 45000 psi |
Tear Strength | 172 kN/m | 981 pli |
| 182 kN/m | 1040 pli |
Abrasion | 100 | 100 |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 2.00e+12 ohm-cm | 2.00e+12 ohm-cm |
Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm |
Dielectric Constant | 3.5 @Frequency 1e+6 Hz | 3.5 @Frequency 1e+6 Hz |
| 4.0 @Frequency 100 Hz | 4.0 @Frequency 100 Hz |
Dielectric Strength | 20.0 kV/mm | 508 kV/in |
Dissipation Factor | 0.016 @Frequency 100 Hz | 0.016 @Frequency 100 Hz |
| 0.030 @Frequency 1e+6 Hz | 0.030 @Frequency 1e+6 Hz |
Comparative Tracking Index | 600 V | 600 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 180 µm/m-°C | 100 µin/in-°F |
| 120 µm/m-°C @Temperature -40.0 - 23.0 °C | 66.7 µin/in-°F @Temperature -40.0 - 73.4 °F |
CTE, linear, Transverse to Flow | 170 µm/m-°C | 94.4 µin/in-°F |
| 130 µm/m-°C @Temperature -40.0 - 23.0 °C | 72.2 µin/in-°F @Temperature -40.0 - 73.4 °F |
Specific Heat Capacity | 2.15 J/g-°C @Temperature 245 °C | 0.514 BTU/lb-°F @Temperature 473 °F |
Thermal Conductivity | 0.150 W/m-K @Temperature 245 °C | 1.04 BTU-in/hr-ft²-°F @Temperature 473 °F |
Melting Point | 218 °C | 424 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 100 °C | 212 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 50.0 °C | 122 °F |
Vicat Softening Point | 140 °C | 284 °F |
| 205 °C | 401 °F |
Brittleness Temperature | -97.0 °C | -143 °F |
Glass Transition Temp, Tg | 25.0 °C | 77.0 °F |
Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in |
Oxygen Index | 23 % | 23 % |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 235 °C | 455 °F |
| 225 - 245 °C | 437 - 473 °F |
| 245 °C | 473 °F |
| 240 - 260 °C | 464 - 500 °F |
Mold Temperature | 45.0 °C | 113 °F |
| 45.0 - 55.0 °C | 113 - 131 °F |
Drying Temperature | 100 - 120 °C | 212 - 248 °F |
| 110 °C | 230 °F |
Dry Time | 2.00 - 3.00 hour | 2.00 - 3.00 hour |
| 2.00 - 3.00 hour | 2.00 - 3.00 hour |
Moisture Content | <= 0.060 % | <= 0.060 % |
| <= 0.080 % | <= 0.080 % |
Hold Pressure | <= 70.0 MPa | <= 10200 psi |
|
Descriptive Properties |
---|
Drying Recommended | yes |
Eff. thermal diffusivity (m²/s) | 8E-08 |
Emission of organic compounds (µgC/g) | 300 |
FMVSS Class | SE/B |
ISO designation | ISO 20029-TPC-ET,,GLN,70-22-075 |
Light stability delta a | -0.1 |
Light stability delta b | 15 |
Light stability delta E | 16 |
Light stability delta l | -3 |
Part Marking Code | >TPC-ET< |
Polymer | TPC |
Resin Identification | TPC-ET |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.