|
Physical Properties | Metric | English | Comments |
---|
Density | 1.40 g/cc | 0.0506 lb/in³ |
Melt Density | 1.24 g/cc @Temperature 295 °C | 0.0448 lb/in³ @Temperature 563 °F |
Water Absorption | 5.5 % @Thickness 2.00 mm | 5.5 % @Thickness 0.0787 in |
Moisture Absorption | 1.70 % @Thickness 2.00 mm | 1.70 % @Thickness 0.0787 in |
Viscosity | 170000 cP @Shear Rate 1000 1/s, Temperature 280 °C | 170000 cP @Shear Rate 1000 1/s, Temperature 536 °F |
Viscosity Number | 143 cm³/g | 1.43 dl/g |
Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in |
Linear Mold Shrinkage, Transverse | 0.010 cm/cm | 0.010 in/in |
|
Mechanical Properties | Metric | English | Comments |
---|
Tensile Strength at Break | 140 MPa | 20300 psi |
| 200 MPa | 29000 psi |
Elongation at Break | 3.5 % | 3.5 % |
| 4.6 % | 4.6 % |
Tensile Modulus | 8.50 GPa | 1230 ksi |
| 11.0 GPa | 1600 ksi |
Flexural Strength | 230 MPa | 33400 psi |
| 290 MPa | 42100 psi |
Flexural Modulus | 7.50 GPa | 1090 ksi |
| 10.0 GPa | 1450 ksi |
Poissons Ratio | 0.34 | 0.34 |
| 0.34 | 0.34 |
Izod Impact, Notched (ISO) | 13.0 kJ/m² @Temperature -40.0 °C | 6.19 ft-lb/in² @Temperature -40.0 °F |
| 15.0 kJ/m² @Temperature 23.0 °C | 7.14 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact Unnotched | 8.00 J/cm² @Temperature -30.0 °C | 38.1 ft-lb/in² @Temperature -22.0 °F |
| 8.00 J/cm² @Temperature -30.0 °C | 38.1 ft-lb/in² @Temperature -22.0 °F |
| 9.00 J/cm² @Temperature 23.0 °C | 42.8 ft-lb/in² @Temperature 73.4 °F |
| 10.0 J/cm² @Temperature 23.0 °C | 47.6 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 1.00 J/cm² @Temperature -30.0 °C | 4.76 ft-lb/in² @Temperature -22.0 °F |
| 1.10 J/cm² @Temperature -30.0 °C | 5.23 ft-lb/in² @Temperature -22.0 °F |
| 1.10 J/cm² @Temperature -40.0 °C | 5.23 ft-lb/in² @Temperature -40.0 °F |
| 1.40 J/cm² @Temperature 23.0 °C | 6.66 ft-lb/in² @Temperature 73.4 °F |
| 1.80 J/cm² @Temperature 23.0 °C | 8.57 ft-lb/in² @Temperature 73.4 °F |
Puncture Energy | 6.00 J @Temperature 23.0 °C | 4.43 ft-lb @Temperature 73.4 °F |
Tensile Creep Modulus, 1 hour | 8500 MPa | 1.23e+6 psi |
Tensile Creep Modulus, 1000 hours | 6000 MPa | 870000 psi |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm |
| >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm |
Dielectric Strength | 31.0 kV/mm | 787 kV/in |
| 36.0 kV/mm | 914 kV/in |
Comparative Tracking Index | 575 V | 575 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 14.0 µm/m-°C | 7.78 µin/in-°F |
CTE, linear, Transverse to Flow | 85.0 µm/m-°C | 47.2 µin/in-°F |
Specific Heat Capacity | 2.13 J/g-°C @Temperature 295 °C | 0.509 BTU/lb-°F @Temperature 563 °F |
Thermal Conductivity | 0.240 W/m-K @Temperature 295 °C | 1.67 BTU-in/hr-ft²-°F @Temperature 563 °F |
Melting Point | 260 °C | 500 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F |
Deflection Temperature at 8.0 MPa | 110 °C | 230 °F |
Vicat Softening Point | 255 °C | 491 °F |
Glass Transition Temp, Tg | 20.0 °C | 68.0 °F |
| 70.0 °C | 158 °F |
Flammability, UL94 | HB @Thickness 0.750 mm | HB @Thickness 0.0295 in |
| HB @Thickness 1.50 mm | HB @Thickness 0.0591 in |
Flame Spread | 26.0 mm/min @Thickness 1.00 mm | 1.02 in/min @Thickness 0.0394 in |
Oxygen Index | 24 % | 24 % |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 295 °C | 563 °F |
| 285 - 305 °C | 545 - 581 °F |
Mold Temperature | 70.0 - 120 °C | 158 - 248 °F |
| 100 °C | 212 °F |
Ejection Temperature | 210 °C | 410 °F |
Drying Temperature | 80.0 °C | 176 °F |
Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour |
Moisture Content | <= 0.20 % | <= 0.20 % |
Hold Pressure | 50.0 - 100 MPa | 7250 - 14500 psi |
|
Descriptive Properties |
---|
Additives | Low halide content |
| Release agent |
Drying Recommended | yes |
FMVSS Class | B |
Fogging (mg) | 0.5 |
ISO designation | ISO 16396-PA66,GF35,M1GNR,S14-110 |
Max. screw tangential speed (m/s) | 0.2 |
Odor Class | 3 |
Part Marking Code | >PA66-GF35< |
Polymer | PA66-GF35 |
Processing Hold Pressure Time (s/mm) | 3 |
Regional Availability | Asia Pacific |
| Europe |
| Global |
| Near East/Africa |
| North America |
| South and Central America |
Resin Identification | PA66-GF35 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.