|
Physical Properties | Metric | English | Comments |
---|
Density | 1.53 g/cc | 0.0553 lb/in³ |
Water Absorption at Saturation | 0.50 % @Temperature 23.0 °C | 0.50 % @Temperature 73.4 °F |
| 0.60 % @Temperature 100 °C | 0.60 % @Temperature 212 °F |
Viscosity | 450000 cP @Temperature 400 °C | 450000 cP @Temperature 752 °F |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in |
Spiral Flow | 10.5 cm @Thickness 1.00 mm | 4.13 in @Thickness 0.0394 in |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore D | 88 @Temperature 23.0 °C | 88 @Temperature 73.4 °F |
Tensile Strength at Break | 55.0 MPa @Temperature 275 °C | 7980 psi @Temperature 527 °F |
| 65.0 MPa @Temperature 225 °C | 9430 psi @Temperature 437 °F |
| 75.0 MPa @Temperature 175 °C | 10900 psi @Temperature 347 °F |
| 125 MPa @Temperature 125 °C | 18100 psi @Temperature 257 °F |
| 200 MPa @Temperature 23.0 °C | 29000 psi @Temperature 73.4 °F |
Elongation at Break | 2.9 % @Temperature 23.0 °C | 2.9 % @Temperature 73.4 °F |
Tensile Modulus | 12.0 GPa @Temperature 23.0 °C | 1740 ksi @Temperature 73.4 °F |
Flexural Strength | 85.0 MPa @Temperature 275 °C | 12300 psi @Temperature 527 °F |
| 120 MPa @Temperature 175 °C | 17400 psi @Temperature 347 °F |
| 210 MPa @Temperature 123 °C | 30500 psi @Temperature 253 °F |
| 290 MPa @Temperature 23.0 °C | 42100 psi @Temperature 73.4 °F |
Flexural Modulus | 11.0 GPa @Temperature 23.0 °C | 1600 ksi @Temperature 73.4 °F |
Compressive Strength | 50.0 MPa @Temperature 250 °C | 7250 psi @Temperature 482 °F |
| 75.0 MPa @Temperature 200 °C | 10900 psi @Temperature 392 °F |
| 180 MPa @Temperature 120 °C | 26100 psi @Temperature 248 °F |
| 290 MPa @Temperature 23.0 °C | 42100 psi @Temperature 73.4 °F |
Izod Impact, Notched (ISO) | 11.0 kJ/m² @Temperature 23.0 °C | 5.23 ft-lb/in² @Temperature 73.4 °F |
Izod Impact, Unnotched (ISO) | 70.0 kJ/m² @Temperature 23.0 °C | 33.3 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact Unnotched | 7.00 J/cm² @Temperature 23.0 °C | 33.3 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 0.900 J/cm² @Temperature 23.0 °C | 4.28 ft-lb/in² @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm |
Dielectric Constant | 3.2 @Frequency 1000 Hz, Temperature 23.0 °C | 3.2 @Frequency 1000 Hz, Temperature 73.4 °F |
Dielectric Strength | 23.0 kV/mm @Thickness 2.00 mm | 584 kV/in @Thickness 0.0787 in |
Dissipation Factor | 0.0050 @Frequency 1e+6 Hz, Temperature 23.0 °C | 0.0050 @Frequency 1e+6 Hz, Temperature 73.4 °F |
Comparative Tracking Index | 150 V | 150 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 20.0 µm/m-°C @Temperature <=152 °C | 11.1 µin/in-°F @Temperature <=306 °F |
| 25.0 µm/m-°C @Temperature >=152 °C | 13.9 µin/in-°F @Temperature >=306 °F |
CTE, linear, Transverse to Flow | 45.0 µm/m-°C @Temperature <=152 °C | 25.0 µin/in-°F @Temperature <=306 °F |
| 110 µm/m-°C @Temperature >=153 °C | 61.1 µin/in-°F @Temperature >=307 °F |
Thermal Conductivity | 0.300 W/m-K @Temperature 23.0 °C | 2.08 BTU-in/hr-ft²-°F @Temperature 73.4 °F |
| 0.350 W/m-K @Temperature 23.0 °C | 2.43 BTU-in/hr-ft²-°F @Temperature 73.4 °F |
Melting Point | 373 °C | 703 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 360 °C | 680 °F |
Glass Transition Temp, Tg | 152 °C | 306 °F |
| 160 °C | 320 °F |
Glow Wire Flammability Index | 960 °C @Thickness 2.00 mm | 1760 °F @Thickness 0.0787 in |
|
Processing Properties | Metric | English | Comments |
---|
Processing Temperature | <= 100 °C | <= 212 °F |
Rear Barrel Temperature | 375 °C | 707 °F |
Middle Barrel Temperature | 380 - 385 °C | 716 - 725 °F |
Front Barrel Temperature | 390 °C | 734 °F |
Nozzle Temperature | 395 °C | 743 °F |
Mold Temperature | 190 - 215 °C | 374 - 419 °F |
Drying Temperature | 120 - 150 °C | 248 - 302 °F |
Dry Time | 3.00 - 5.00 hour | 3.00 - 5.00 hour |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.