|
Physical Properties | Metric | English | Comments |
---|
Density | 1.32 g/cc | 0.0477 lb/in³ |
Melt Density | 1.12 g/cc @Temperature 290 °C | 0.0405 lb/in³ @Temperature 554 °F |
Water Absorption | 1.8 % @Thickness 2.00 mm | 1.8 % @Thickness 0.0787 in |
Moisture Absorption | 0.800 % @Thickness 2.00 mm | 0.800 % @Thickness 0.0787 in |
Viscosity Number | 105 cm³/g | 1.05 dl/g |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in |
| 0.0030 cm/cm @Thickness 3.17 mm | 0.0030 in/in @Thickness 0.125 in |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in |
| 0.010 cm/cm @Thickness 3.17 mm | 0.010 in/in @Thickness 0.125 in |
|
Mechanical Properties | Metric | English | Comments |
---|
Tensile Strength at Break | 150 MPa | 21800 psi |
| 180 MPa | 26100 psi |
Elongation at Break | 3.0 % | 3.0 % |
| 4.0 % | 4.0 % |
Tensile Modulus | 8.00 GPa | 1160 ksi |
| 10.0 GPa | 1450 ksi |
Flexural Strength | 250 MPa | 36300 psi |
Flexural Modulus | 7.50 GPa | 1090 ksi |
| 9.00 GPa | 1310 ksi |
Poissons Ratio | 0.34 | 0.34 |
| 0.34 | 0.34 |
Izod Impact, Notched (ISO) | 10.0 kJ/m² @Temperature -40.0 °C | 4.76 ft-lb/in² @Temperature -40.0 °F |
| 11.0 kJ/m² @Temperature 23.0 °C | 5.23 ft-lb/in² @Temperature 73.4 °F |
Izod Impact, Unnotched (ISO) | 60.0 kJ/m² @Temperature 23.0 °C | 28.6 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 1.00 J/cm² @Temperature -40.0 °C | 4.76 ft-lb/in² @Temperature -40.0 °F |
| 1.20 J/cm² @Temperature 23.0 °C | 5.71 ft-lb/in² @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm |
| 1.00e+15 ohm-cm | 1.00e+15 ohm-cm |
Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm |
Dielectric Strength | 34.0 kV/mm | 864 kV/in |
Comparative Tracking Index | 600 V | 600 V |
| 600 V | 600 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 20.0 µm/m-°C | 11.1 µin/in-°F |
| 14.0 µm/m-°C @Temperature 55.0 - 160 °C | 7.78 µin/in-°F @Temperature 131 - 320 °F |
| 26.0 µm/m-°C @Temperature -40.0 - 23.0 °C | 14.4 µin/in-°F @Temperature -40.0 - 73.4 °F |
CTE, linear, Transverse to Flow | 110 µm/m-°C | 61.1 µin/in-°F |
| 83.0 µm/m-°C @Temperature -40.0 - 23.0 °C | 46.1 µin/in-°F @Temperature -40.0 - 73.4 °F |
| 160 µm/m-°C @Temperature 55.0 - 160 °C | 88.9 µin/in-°F @Temperature 131 - 320 °F |
Specific Heat Capacity | 2.13 J/g-°C @Temperature 290 °C | 0.509 BTU/lb-°F @Temperature 554 °F |
Thermal Conductivity | 0.260 W/m-K @Temperature 290 °C | 1.80 BTU-in/hr-ft²-°F @Temperature 554 °F |
Melting Point | 218 °C | 424 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 216 °C | 421 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 200 °C | 392 °F |
Flammability, UL94 | HB @Thickness 0.750 mm | HB @Thickness 0.0295 in |
| HB @Thickness 1.50 mm | HB @Thickness 0.0591 in |
Flame Spread | 23.0 mm/min @Thickness 1.00 mm | 0.906 in/min @Thickness 0.0394 in |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 290 °C | 554 °F |
| 280 - 300 °C | 536 - 572 °F |
Mold Temperature | 70.0 - 120 °C | 158 - 248 °F |
Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour |
Moisture Content | <= 0.15 % | <= 0.15 % |
|
Descriptive Properties |
---|
Additives | Low halide content |
| Release agent |
Drying Recommended | yes |
FMVSS Class | B |
Fogging (mg) | 0.1 |
ISO designation | ISO 16396-PA612,GF33,M1CG1HR,S10-100 |
Part Marking Code | >PA612-GF33< |
Polymer | PA612-GF33 |
Resin Identification | PA612-GF33 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.