MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  
Metal adhesives
Master Bond MB297 Ethyl Cyanoacrylate Adhesive System
Categories: Polymer; Adhesive; Thermoset; Acrylic/Cyanoacrylate Adhesive

Material Notes: Key Features:
  • One component, non-mix system
  • Top level adhesion to a wide variety of substrates
  • Fast setting with rapid fixture time
  • Industrial grade
Product Description: Master Bond MB297 is a single component ethyl cyanoacrylate adhesive. MB297 is a high strength, rapid curing general purpose type cyanoacrylate system. MB297 has a higher viscosity (2,200-2,400 cps) and a slightly longer open time than low viscosity counterparts. Similar to other types of “super glue”, MB297 cures very rapidly with the rate of cure dependent upon the humidity—the higher it is, the faster the cure. Because curing is normally fast, minimal contact pressure is usually sufficient for bonding. It must be emphasized that this high strength system requires no heating or mixing. It typically sets up within 20-50 seconds depending upon the humidity and the substrates. The bond strength is exceptionally high in the shear mode. MB297 bonds well to a variety of substrates, especially to plastics, rubbers and metals. It has reasonably good chemical resistance, especially to cleaning agents. (See chemical resistance table.) The service temperature range for this system is -60°F to +250°F. MB297 is a versatile, high performance, industrial grade cyanoacrylate that can be used in a wide array of different applications in the aerospace, electronic, OEM, electrical, optical and R&D industries.

Product Advantages:

  • Rapid curing at room temperature; usually sets up within 1 minute
  • No heating or mixing
  • Contact pressure usually sufficient for fixturing
  • Bonds well to a wide variety of substrates
  • Higher viscosity

Information provided by Master Bond Inc.

Vendors:
Available Properties
  • Specific Gravity
  • Viscosity
  • Hardness, Shore D
  • Tensile Strength
  • Elongation at Break
  • Tensile Modulus
  • Adhesive Bond Strength, Substrate Failure, Butyl-Butyl, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Steel-Butyl, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Steel-Natural Rubber, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, SBR-SBR, Tensile lap
  • Adhesive Bond Strength, Chloloroprene-Chloloroprene, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Natural Rubber-Natural Rubber, Tensile lap
  • Adhesive Bond Strength, Neoprene-Steel, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Nitrile-Nitrile, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, NBR-NBR, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Neoprene-Neoprene, Tensile lap
  • Adhesive Bond Strength, Polystyrene-Polystyrene, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Phenolic-Phenolic, Tensile lap
  • Adhesive Bond Strength, Nylon-Nylon, Tensile lap
  • Adhesive Bond Strength, Nylon-Bakelite, Tensile lap
  • Adhesive Bond Strength, Delrin-Delrin, Tensile lap
  • Adhesive Bond Strength, NBR-Aluminum, Tensile lap
  • Adhesive Bond Strength, Aluminum-Aluminum, Tensile lap
  • Adhesive Bond Strength, Chromium-Chromium, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, ABS-ABS, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Nylon-Copper, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, Steel-PVC (rigid), Tensile lap
  • Adhesive Bond Strength, Aluminum-Stainless Steel, Tensile lap
  • Adhesive Bond Strength, Steel-Stainless Steel, Tensile lap
  • Adhesive Bond Strength, Polyester-Polyester, Tensile lap
  • Adhesive Bond Strength, Steel-Aluminum, Tensile lap
  • Adhesive Bond Strength, Brass-Brass, Tensile lap
  • Adhesive Bond Strength, Steel-Steel, Tensile lap
  • Adhesive Bond Strength, Copper-Copper, Tensile lap
  • Adhesive Bond Strength, Stainless-Stainless, Tensile lap
  • Adhesive Bond Strength, Substrate Failure, PVC(rigid)-PVC(rigid), Tensile lap
  • Volume Resistivity
  • Dielectric Constant
  • CTE, linear
  • Maximum Service Temperature, Air
  • Softening Point
  • Minimum Service Temperature, Air
  • Cure Time, set up time, substrate dependent
  • Shelf Life, in original, unopened containers
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

Manufacturer Notes:
Master Bond Inc.

Category Notes
Plastic

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

 

Metal adhesives
Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.