(Viewing data as-entered. Click here to return)
|
Physical Properties | Original Value | Comments |
---|
Specific Gravity | 1.53 g/cc |
Density | 1.52 g/cc |
Moisture Absorption | 0.0600 % |
Water Absorption at Saturation | 0.23 % |
Viscosity | 210000 cP |
Linear Mold Shrinkage, Flow | 0.0010 - 0.0050 cm/cm |
| 0.0010 - 0.0050 cm/cm @Thickness 3.20 mm |
Linear Mold Shrinkage, Transverse | 0.0060 - 0.012 cm/cm |
| 0.0050 - 0.011 cm/cm @Thickness 3.20 mm |
Melt Flow | 27 g/10 min @Load 5.00 kg, Temperature 250 °C |
Melt Index of Compound | 20 g/10 min @Load 5.00 kg, Temperature 250 °C |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 105 MPa |
| 112 MPa |
Tensile Strength, Yield | 105 MPa |
| 112 MPa |
Elongation at Break | 2.0 % |
| 2.0 % |
Elongation at Yield | 2.0 % |
| 2.0 % |
Tensile Modulus | 9900 MPa |
| 10350 MPa |
Flexural Yield Strength | 161 MPa |
| 170 MPa |
Flexural Modulus | 9100 MPa |
| 9400 MPa |
Flexural Strain at Break | 2.0 % |
Izod Impact, Notched | 62.0 J/m |
| 59.0 J/m @Temperature -30.0 °C |
Izod Impact, Unnotched | 515 J/m |
| 470 J/m @Temperature -30.0 °C |
Izod Impact, Notched (ISO) | 7.00 kJ/m² |
| 7.00 kJ/m² @Temperature -30.0 °C |
Izod Impact, Unnotched (ISO) | 33.0 kJ/m² |
| 29.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact Unnotched | 36.0 kJ/m² |
| 33.0 kJ/m² @Temperature -30.0 °C |
Charpy Impact, Notched | 5.00 kJ/m² |
| 7.00 kJ/m² |
| 7.00 kJ/m² @Temperature -30.0 °C |
Dart Drop, Total Energy | 6.00 J @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+15 - 1.00e+16 ohm-cm |
| 1.00e+15 - 1.00e+16 ohm-cm |
Dielectric Strength | 21.0 kV/mm @Thickness 3.20 mm |
| 21.0 kV/mm @Thickness 3.20 mm |
Arc Resistance | 60 - 120 sec |
Comparative Tracking Index | 300 V |
| 250 - 400 V |
Hot Wire Ignition, HWI | >= 120 sec |
High Amp Arc Ignition, HAI | >= 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | 0.000 - 10.0 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 22.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
| 22.0 µm/m-°C @Temperature -40.0 - 150 °C |
| 27.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 30.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
CTE, linear, Transverse to Flow | 71.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 76.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 77.0 µm/m-°C @Temperature -40.0 - 150 °C |
| 91.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 219 °C |
| 216 °C @Thickness 3.20 mm |
Deflection Temperature at 1.8 MPa (264 psi) | 201 °C |
| 204 °C @Thickness 3.20 mm |
Vicat Softening Point | 202 °C |
| 206 °C |
| 206 °C |
| 215 °C |
| 219 °C |
UL RTI, Electrical | 130 °C |
UL RTI, Mechanical with Impact | 140 °C |
UL RTI, Mechanical without Impact | 140 °C |
Flammability, UL94 | V-0 @Thickness 0.750 mm |
| 5VA @Thickness 3.00 mm |
Glow Wire Ignition Temperature | 775 °C |
| 775 °C |
Glow Wire Flammability Index | 960 °C @Thickness 0.750 mm |
|
Descriptive Properties |
---|
Ball Pressure Test, 125°C +/- 2°C | Pass |
**
This data sheet is not an active part of MatWeb and the information on it should not be considered reliable.
Inactive data sheets have usually been replaced with newer information on the same material. If this is the case, you can find the active data sheet by using any of our search tools, including the Quick Search box in the upper part of this page.
If you are unable to locate an active data sheet for this material, then this material is likely discontinued, although various other reasons may be behind its removal. In any event, do not rely on the information on this page to be accurate or maintained.
You may have reached this data sheet through an outdated bookmark or link. Please update your bookmark accordingly. We apologize if you have accessed this page through MatWeb’s usual search tools.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.