|
Physical Properties | Metric | English | Comments |
---|
Density | 1.33 g/cc | 0.0480 lb/in³ |
Water Absorption | 0.10 % @Temperature 23.0 °C | 0.10 % @Temperature 73.4 °F |
Moisture Absorption at Equilibrium | 0.50 % | 0.50 % |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore A | 100 | 100 |
Hardness, Shore D | 87 | 87 |
Ball Indentation Hardness | 175 MPa | 25400 psi |
Tensile Strength at Break | 90.0 MPa | 13100 psi |
Tensile Strength | 92.0 MPa | 13300 psi |
Tensile Strength, Yield | 76.0 MPa | 11000 psi |
| 92.0 MPa | 13300 psi |
Tensile Stress at Strain | 26.0 MPa @Strain 1 %, Time 3.60e+6 sec | 3770 psi @Strain 1 %, Time 1000 hour |
Elongation at Break | 23.9 % | 23.9 % |
| 23.9 % | 23.9 % |
Elongation at Yield | 1.5 % | 1.5 % |
| 6.9 % | 6.9 % |
| 6.9 % | 6.9 % |
Tensile Modulus | 3.50 GPa | 508 ksi |
Flexural Strength | 110 MPa | 16000 psi |
| 127 MPa | 18400 psi |
Flexural Modulus | 3.90 GPa | 566 ksi |
Flexural Strain at Yield | 5.7 % | 5.7 % |
Compressive Strain at Break | 5.4 % | 5.4 % |
Compressive Strain at Yield | 5.4 % | 5.4 % |
Compressive Yield Strength | 76.0 MPa | 11000 psi |
| 103 MPa | 14900 psi |
Compressive Strength | 103 MPa | 14900 psi |
| 35.0 MPa @Time 3.60e+7 sec | 5080 psi @Time 10000 hour |
| 67.0 MPa @Time 360000 sec | 9720 psi @Time 100 hour |
| 81.0 MPa @Time 36.0 sec | 11700 psi @Time 0.0100 hour |
| 80.0 MPa @Strain 3.5 % | 11600 psi @Strain 3.5 % |
Compressive Modulus | 2.54 GPa | 368 ksi |
Fatigue Strength | 56.0 MPa @# of Cycles 1.00e+6 | 8120 psi @# of Cycles 1.00e+6 |
K Factor (ISO) | 1.4 µm/km @Temperature 100 °C | 1.4 µm/km @Temperature 212 °F |
| 4.8 µm/km @Temperature 200 °C | 4.8 µm/km @Temperature 392 °F |
| 6.4 µm/km @Temperature 240 °C | 6.4 µm/km @Temperature 464 °F |
| 12.1 µm/km @Temperature 20.0 °C | 12.1 µm/km @Temperature 68.0 °F |
Charpy Impact Unnotched | NB | NB |
Charpy Impact, Notched | 0.630 J/cm² | 3.00 ft-lb/in² |
Coefficient of Friction, Dynamic | 0.090 @Temperature 100 °C | 0.090 @Temperature 212 °F |
| 0.16 @Temperature 20.0 °C | 0.16 @Temperature 68.0 °F |
Coefficient of Friction, Static | 0.13 @Temperature 20.0 °C | 0.13 @Temperature 68.0 °F |
Tensile Creep Modulus, 1000 hours | 2500 MPa | 363000 psi |
Limiting Pressure Velocity | 0.46666 MPa-m/sec | 13323 psi-ft/min |
| 0.500 MPa-m/sec | 14300 psi-ft/min |
| 0.66666 MPa-m/sec | 19033 psi-ft/min |
| 1.0355 MPa-m/sec | 29564 psi-ft/min |
Compression Set | 3.3 % | 3.3 % |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 6.00e+16 ohm-cm | 6.00e+16 ohm-cm |
Surface Resistance | 6.80e+12 ohm | 6.80e+12 ohm |
Dielectric Constant | 3.3 @Frequency 110 Hz | 3.3 @Frequency 110 Hz |
Dielectric Strength | 27.0 kV/mm | 686 kV/in |
Dissipation Factor | 0.0020 | 0.0020 |
| 0.061 @Frequency 110 Hz | 0.061 @Frequency 110 Hz |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear | 62.0 µm/m-°C @Temperature <=100 °C | 34.4 µin/in-°F @Temperature <=212 °F |
| 65.0 µm/m-°C @Temperature <=150 °C | 36.1 µin/in-°F @Temperature <=302 °F |
Specific Heat Capacity | 1.05 J/g-°C | 0.251 BTU/lb-°F |
Melting Point | 340 °C | 644 °F |
Maximum Service Temperature, Air | 115 °C | 239 °F |
| 250 °C | 482 °F |
| 260 °C | 500 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 171 °C | 340 °F |
Glass Transition Temp, Tg | 146 °C | 295 °F |
Flammability, UL94 | V-0 | V-0 |
|
Compliance Properties | Metric | English | Comments |
---|
FDA | Yes | Yes |
|
Descriptive Properties |
---|
Alignment Adjustment | 4 |
Chemical Sterilization | 10 |
Color | Beige |
Creep Resistance | 5 |
Dimensional Stability with Thermal Expansion | 5 |
Free from Silicon | Applicable |
Gamma-rays Radiation Sterilization | 7 |
High Precision Bushings (negative clearance) | Applicable |
Injection Molded Parts | Applicable |
Machined Parts | Applicable |
Moist Heat Sterilization | 10 |
Plastic Granules | Applicable |
Resistance Against dust, Dirt, Abrasive Substances | 7 |
Resistance Against Hot Water | 200 |
Resistance to Chemicals | 9 |
Resistant Against Disinfectant | Applicable |
Rods up to Øe (de) | Applicable |
ROHS/WEEE | Applicable |
Sheets up to Maximum Thickness | Applicable |
Sliding Velocity | 200 |
Suitable for Outdoor Use | 7 |
Suitable for Use in Water | Applicable |
Suitable for Vacuum | Applicable |
Tubes (hollow rods) up to Øe (de) | Applicable |
UV Rays Resistance | 9 |
UV-Sterilization | 7 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.