|
Physical Properties | Original Value | Comments |
---|
Density | 1.20 - 1.90 g/cc |
| 1.24 - 1.29 g/cc @Temperature 261 - 295 °C |
Filler Content | 30.0 - 43.0 % |
Water Absorption | 0.300 - 6.50 % |
Moisture Absorption at Equilibrium | 0.170 - 2.30 % |
| 1.30 - 2.00 % @Temperature 70.0 - 70.0 °C |
Water Absorption at Saturation | 3.50 - 8.00 % |
Additive Loading | 35.0 - 40.0 % |
Viscosity | 2.70 - 50.0 cP |
| 238 - 238 cP @Temperature 285 - 285 °C |
| 20.0 - 170000 cP @Temperature 100 - 2000 °C |
| 20.0 - 170000 cP @Shear Rate 10.0 - 10000 1/s |
Viscosity Test | 140 - 150 cm³/g |
Viscosity Number | 110 - 146 cm³/g |
Maximum Moisture Content | 0.0200 - 0.200 |
Linear Mold Shrinkage | 0.000300 - 0.0250 cm/cm |
| 0.00400 - 0.00400 cm/cm @Temperature 80.0 - 80.0 °C |
Linear Mold Shrinkage, Transverse | 0.000900 - 0.0180 cm/cm |
| 0.00700 - 0.00700 cm/cm @Temperature 80.0 - 80.0 °C |
Melt Flow | 1.00 - 56.4 g/10 min |
Spiral Flow | 66.0 - 664 cm |
Ash | 35.0 - 43.0 % |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell M | 85.0 - 110 |
Hardness, Rockwell R | 111 - 125 |
Hardness, Shore D | 81.0 - 88.0 |
Ball Indentation Hardness | 130 - 310 MPa |
Tensile Strength, Ultimate | 14.5 - 350 MPa |
| 45.0 - 280 MPa @Temperature -40.0 - 150 °C |
Tensile Strength, Yield | 84.1 - 230 MPa |
| 125 - 145 MPa @Temperature 90.0 - 120 °C |
Elongation at Break | 1.00 - 11.0 % |
| 2.00 - 5.60 % @Temperature -40.0 - 150 °C |
Elongation at Yield | 2.00 - 7.00 % |
Modulus of Elasticity | 1.30 - 21.0 GPa |
| 3.10 - 14.479 GPa @Temperature -40.0 - 150 °C |
Flexural Yield Strength | 27.6 - 390 MPa |
| 130 - 388.175 MPa @Temperature -40.0 - 121 °C |
Flexural Modulus | 4.00 - 50.7 GPa |
| 4.80 - 14.0 GPa @Temperature -40.0 - 121 °C |
Flexural Strain at Break | 3.00 - 6.20 % |
| 3.70 - 3.70 % @Temperature 80.0 - 80.0 °C |
Compressive Yield Strength | 29.6 - 276 MPa |
Poissons Ratio | 0.330 - 0.400 |
Shear Strength | 26.0 - 90.0 MPa |
Izod Impact, Notched | 0.140 - 5.07 J/cm |
| 0.980665 - 4.64493 J/cm @Temperature -40.0 - 149 °C |
Izod Impact, Unnotched | 0.122 - 16.0 J/cm |
Izod Impact, Notched (ISO) | 2.50 - 47.0 kJ/m² |
| 7.70 - 64.0 kJ/m² @Temperature -40.0 - -30.0 °C |
Izod Impact, Unnotched (ISO) | 12.0 - 105 kJ/m² |
| 60.0 - 105 kJ/m² @Temperature -30.0 - -30.0 °C |
Charpy Impact Unnotched | 3.80 J/cm² - NB |
| 3.00 - 11.0 J/cm² @Temperature -40.0 - -20.0 °C |
Charpy Impact, Notched | 0.300 - 3.99 J/cm² |
| 0.600 - 3.60 J/cm² @Temperature -40.0 - -20.0 °C |
Dart Drop, Total Energy | 5.35 - 13.9 J @Temperature -20.0 - -20.0 °C |
| 5.35 - 13.9 J @Thickness 3.18 - 3.18 mm |
Puncture Energy | 3.20 - 17.8 J |
| 2.60 - 2.80 J @Temperature -30.0 - -30.0 °C |
Tensile Creep Modulus, 1 hour | 7000 - 10800 MPa |
Tensile Creep Modulus, 1000 hours | 4250 - 7960 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 101000 - 1.00e+18 ohm-cm |
Surface Resistance | 3.00e+7 - 1.00e+15 ohm |
Dielectric Constant | 3.10 - 14.0 |
Dielectric Strength | 15.0 - 90.0 kV/mm |
Dissipation Factor | 0.00200 - 0.650 |
Dielectric Loss Index | 0.0150 - 0.150 |
Arc Resistance | 60.0 - 180 sec |
Comparative Tracking Index | 250 - 600 V |
Hot Wire Ignition, HWI | 2.00 - 30.0 sec |
High Amp Arc Ignition, HAI | 0.000 - 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | 10.0 - 25.4 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 2.00 - 95.0 µm/m-°C |
| 4.00 - 21.0 µm/m-°C @Temperature 55.0 - 160 °C |
| 16.0 - 21.0 µm/m-°C @Temperature 35.0 - 55.0 °C |
| 16.0 - 21.0 µm/m-°C @Thickness 2.00 - 2.00 mm |
CTE, linear, Transverse to Flow | 7.00 - 110 µm/m-°C |
| 120 - 150 µm/m-°C @Temperature 55.0 - 160 °C |
Specific Heat Capacity | 1.26 - 1.50 J/g-°C |
| 2.05 - 2.30 J/g-°C @Temperature 261 - 295 °C |
Thermal Conductivity | 0.310 - 0.519 W/m-K |
| 0.220 - 0.250 W/m-K @Temperature 261 - 295 °C |
Melting Point | 220 - 325 °C |
Maximum Service Temperature, Air | 65.0 - 304 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 205 - 290 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 107 - 280 °C |
Deflection Temperature at 8.0 MPa | 70.0 - 240 °C |
Vicat Softening Point | 200 - 265 °C |
Minimum Service Temperature, Air | 90.0 - 100 °C |
Glass Transition Temp, Tg | 5.00 - 80.0 °C |
UL RTI, Electrical | 65.0 - 140 °C |
UL RTI, Mechanical with Impact | 65.0 - 130 °C |
UL RTI, Mechanical without Impact | 65.0 - 140 °C |
Flammability, UL94 | HB - 5VA |
Flame Spread | 0.000 - 80.0 mm/min |
Oxygen Index | 21.0 - 36.0 % |
Glow Wire Test | 600 - 960 °C |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 70.0 - 315 °C |
Nozzle Temperature | 254 - 315 °C |
Die Temperature | 300 - 320 °C |
Melt Temperature | 230 - 320 °C |
Mold Temperature | 26.7 - 160 °C |
Injection Velocity | 30.0 - 80.0 mm/sec |
Drying Temperature | 65.6 - 130 °C |
Moisture Content | 0.0200 - 0.200 % |
Dew Point | -28.9 - -17.8 °C |
Injection Pressure | 3.45 - 150 MPa |
Cushion | 0.635 - 0.650 cm |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.