|
Physical Properties | Original Value | Comments |
---|
Density | 1.00 - 3.41 g/cc |
| 1.08 - 1.12 g/cc @Temperature 230 - 230 °C |
Moisture Absorption at Equilibrium | 0.0600 - 2.00 % |
| 0.550 - 1.30 % @Temperature 70.0 - 70.0 °C |
| 0.550 - 1.30 % @Time 180000 - 1.44e+6 sec |
Additive Loading | 10.0 - 40.0 % |
Moisture Vapor Transmission | 8.30 - 15.7 cc-mm/m²-24hr-atm |
Water Vapor Transmission | 3.88 - 170 g/m²/day |
Oxygen Transmission | 14.0 - 27.6 cc-mm/m²-24hr-atm |
Oxygen Transmission Rate | 130 - 1450 cc/m²/day |
Nitrogen Transmission | 1.65 - 7.29 cc-mm/m²-24hr-atm |
Carbon Dioxide Transmission | 76.0 - 118 cc-mm/m²-24hr-atm |
Maximum Moisture Content | 0.0200 - 0.0800 |
Linear Mold Shrinkage | 0.000600 - 0.0130 cm/cm |
Linear Mold Shrinkage, Transverse | 0.00150 - 0.00650 cm/cm |
Melt Flow | 0.200 - 92.8 g/10 min |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell R | 104 - 118 |
Hardness, Shore A | 63.0 - 87.0 |
Hardness, Shore D | 34.0 - 87.0 |
Ball Indentation Hardness | 105 - 190 MPa |
Tensile Strength, Ultimate | 0.160 - 3000 MPa |
| 5.00 - 42.0 MPa @Temperature 30.0 - 110 °C |
Film Tensile Strength at Yield, MD | 19.0 - 54.0 MPa |
Film Tensile Strength at Yield, TD | 14.0 - 48.0 MPa |
Tensile Strength, Yield | 8.00 - 103 MPa |
| 46.0 - 49.0 MPa @Temperature 30.0 - 110 °C |
Film Elongation at Break, MD | 2.00 - 4550 % |
Film Elongation at Break, TD | 2.00 - 3980 % |
Elongation at Break | 0.500 - 1400 % |
| 15.0 - 100 % @Temperature 30.0 - 110 °C |
Elongation at Yield | 1.00 - 400 % |
| 2.00 - 2.00 % @Temperature 30.0 - 110 °C |
Modulus of Elasticity | 0.0500 - 13.8 GPa |
| 2.96 - 3.60 GPa @Temperature 30.0 - 110 °C |
| 6.10 - 8.90 GPa @Temperature 70.0 - 70.0 °C |
| 6.10 - 8.90 GPa @Time 0.000 - 1.44e+6 sec |
Tenacity | 0.177 - 0.441 N/tex |
Flexural Yield Strength | 0.170 - 159 MPa |
| 79.0 - 93.0 MPa @Temperature 30.0 - 110 °C |
Flexural Modulus | 0.167 - 13.8 GPa |
| 2.96 - 3.60 GPa @Temperature 30.0 - 110 °C |
Flexural Strain at Break | 1.70 - 5.50 % |
Secant Modulus | 0.120 - 0.650 GPa |
Secant Modulus, MD | 3.30 - 3.44 GPa |
Secant Modulus, TD | 3.78 - 3.90 GPa |
Izod Impact, Notched | 0.105 - 8.54 J/cm |
| 0.490332 - 0.490332 J/cm @Temperature -30.0 - -30.0 °C |
Izod Impact, Unnotched | 1.92 - 5340 J/cm |
| 980.567 - 980.567 J/cm @Temperature -30.0 - -30.0 °C |
Izod Impact, Notched (ISO) | 1.60 - 32.5 kJ/m² |
| 9.00 - 40.0 kJ/m² @Temperature 30.0 - 110 °C |
Izod Impact, Unnotched (ISO) | 4.70 kJ/m² - NB |
| 38.0 kJ/m² - NB @Temperature 30.0 - 110 °C |
Charpy Impact Unnotched | 0.430 J/cm² - NB |
| 999.9 - 999.9 J/cm² @Temperature 30.0 - 110 °C |
Charpy Impact, Notched | 0.100 - 1000 J/cm² |
| 2.50 - 6.70 J/cm² @Temperature 30.0 - 110 °C |
Coefficient of Friction | 0.150 - 0.280 |
Coefficient of Friction, Static | 0.160 - 0.340 |
Tear Strength | 12.0 - 180 kN/m |
Elmendorf Tear Strength MD | 10.0 - 499 g |
Elmendorf Tear Strength TD | 110 - 567 g |
Elmendorf Tear Strength, MD | 0.0441 - 0.862 g/micron |
Elmendorf Tear Strength, TD | 0.0361 - 1.28 g/micron |
Dart Drop Total Energy | 240 - 420 J/cm |
Dart Drop Test | 0.00350 - 780 g |
Film Tensile Strength at Break, MD | 11.3 - 110 MPa |
Film Tensile Strength at Break, TD | 10.3 - 145 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 1.00e+8 - 1.00e+15 ohm-cm |
Surface Resistance | 1.00e+10 - 1.00e+15 ohm |
Dielectric Constant | 1.51 - 2.70 |
Dissipation Factor | 0.00300 - 0.0140 |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 101 - 120 µm/m-°C |
Thermal Conductivity | 0.0320 - 0.170 W/m-K |
Melting Point | 64.0 - 220 °C |
Maximum Service Temperature, Air | 52.0 - 240 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 50.0 - 160 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 44.0 - 149 °C |
Vicat Softening Point | 44.0 - 160 °C |
Glass Transition Temp, Tg | -43.0 - 120 °C |
Flammability, UL94 | HB - V-0 |
|
Optical Properties | Original Value | Comments |
---|
Haze | 2.00 - 85.0 % |
Gloss | 90.0 % |
Transmission, Visible | 90.0 % |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 25.0 - 330 °C |
Nozzle Temperature | 140 - 295 °C |
Adapter Temperature | 185 - 200 °C |
Die Temperature | 20.0 - 260 °C |
Melt Temperature | 60.0 - 300 °C |
Mold Temperature | 10.0 - 185 °C |
Drying Temperature | 40.0 - 110 °C |
Moisture Content | 0.0100 - 2.00 % |
| 0.150 - 0.300 % @Temperature 100 - 100 °C |
Dew Point | -40.0 - -35.0 °C |
Drying Air Flow Rate | 14.2 l/min |
Injection Pressure | 55.2 - 138 MPa |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.