MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  
Master Bond adhesives
Celanese VECTRA B130 LCP, 30% Glass Reinforced (with extra stress-strain data)
Categories: Polymer; Thermoplastic; Liquid Crystal Polymer (LCP); Liquid Crystal Polymer (LCP), 30% Glass Fiber Filled

Material Notes: Exceptional stiffness and strength with balance of properties similar to A130. Extremely low CLTE and shrinkage. Highest Limiting Oxygen Index. Some loss in flow compared to A130. 30% glass reinforced.
VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40° C. The time between drying and processing should be as short as possible.
For subsequent storage of the material in the dryer until processed the temperature does not need to be lowered for grades A, B, C, D and V (<= 24 h).

Information provided by Celanese Corporation.

Vendors:
Available Properties
  • Density, ISO 1183
  • Linear Mold Shrinkage, Flow, ISO 294-4
  • Linear Mold Shrinkage, Transverse, ISO 294-4
  • Hardness, Rockwell M, ISO 2039-2
  • Tensile Strength at Break, ISO 527-2/1A, 5mm/min
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Tensile Stress at Strain
  • Elongation at Break, ISO 527-2/1A, 5mm/min
  • Tensile Modulus, ISO 527-2/1A, 1mm/min
  • Flexural Strength, ISO 178
  • Flexural Modulus, ISO 178
  • Compressive Strength, ISO 604
  • Compressive Modulus, ISO 604
  • Izod Impact, Notched (ISO), ISO 180/1A
  • Izod Impact, Unnotched (ISO), ISO 180/1U
  • Charpy Impact Unnotched, ISO 179/1eU
  • Charpy Impact, Notched, ISO 179/1eA
  • Tensile Creep Modulus, 1 hour, ISO 899-1
  • Tensile Creep Modulus, 1000 hours, ISO 899-1
  • Volume Resistivity, IEC 60093
  • Surface Resistance, IEC 60093
  • Dielectric Constant, IEC 60250
  • Dielectric Constant, IEC 60250
  • Dielectric Strength, IEC 60243-1
  • Dissipation Factor, IEC 60250
  • Dissipation Factor, IEC 60250
  • Arc Resistance
  • Comparative Tracking Index, IEC 60112
  • CTE, linear, Parallel to Flow, ISO 11359-2
  • CTE, linear, Transverse to Flow, ISO 11359-2
  • Melting Point, ISO 11357-1,-2,-3
  • Deflection Temperature at 0.46 MPa (66 psi), ISO 75-1, -2
  • Deflection Temperature at 1.8 MPa (264 psi), ISO 75-1, -2
  • Deflection Temperature at 8.0 MPa, ISO 75-1, -2
  • Vicat Softening Point, ISO 306, B50 (50°C/h 50N)
  • Flammability, UL94
  • Oxygen Index, ISO 4589
  • Processing Temperature, hopper
  • Processing Temperature, cavity
  • Feed Temperature
  • Zone 1
  • Zone 2
  • Zone 3
  • Zone 4
  • Die Temperature
  • Melt Temperature
  • Melt Temperature, ISO 294
  • Mold Temperature, ISO 294
  • Injection Velocity, ISO 294
  • Drying Temperature
  • Dry Time
  • Moisture Content, Necessary low maximum
  • Injection Pressure, ISO 294
  • Injection Pressure
  • Hold Pressure
  • Back Pressure
  • Screw Speed
  • Screw Speed
  • Screw Speed
  • Hot-Working Temperature
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

Manufacturer Notes:
Ticona, Celanese Corporation

Category Notes
Plastic

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

 

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.