MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  
Master Bond adhesives
High Temp Metals Alloy 49 Iron-Nickel High Permeability Alloy, Strip, Cold-Rolled
Categories: Metal; Electronic/Magnetic Alloy; Superalloy; Iron Base

Material Notes: High Permeability "49" alloy is a 48% nickel-iron alloy which has a saturation flux density of approximately 15,000 Gauss after hydrogen annealing. Hysteresis loss is very low in either DC or AC circuits in which the frequency is less than 400 cycles per second. Following a low temperature hydrogen anneal at 1300/1400°F (704/760°C), alloy 49 exhibits constant permeability characteristics. Its initial permeability is approximately 500 Gauss. High Permeability "49" alloy resists weather and moisture corrosion to a moderate extent.

High permeability "49" alloy has been used in laminated cores for instrument transformers, magnetic shields and cores for certain electronic and communications devices in which extremely high permeability at low magnetizing forces greatly increases the efficiency and effectiveness of the equipment. Because of its high permeability, it has also been used in solenoid cores in light, sensitive relays that must operate and respond to weak currents that induce low magnetizing forces.

If components are to machined in volume from bar stock, High Permeability "49"-FM, a free-machining grade, is recommended. The standard grade , High Permeability "49" alloy, machines somewhat like the austenitic stainless alloys. It develops gummy chips but does not work harden as rapidly as the stainless alloys. Sulfur-bearing cutting compounds are highly detrimental to the final magnetic properties. Animal lard oil should be used in drilling and machining operations which must be performed at low speeds. Work hardened bars offer the best machining characteristics. Parts should be degreased and cleaned as soon as possible.

Information provided by High Temp Metals.

Vendors:
Available Properties
  • Specific Gravity
  • Hardness, Rockwell B
  • Tensile Strength, Ultimate
  • Elongation at Break
  • Modulus of Elasticity
  • Electrical Resistivity, Temperature coefficient = 0.0036/°C (-17.8 to 499°C)
  • Magnetic Permeability, ASTM A596, Initial; B100; heat treatment unknown
  • Magnetic Permeability, ASTM A596, Initial; B100; heat treatment unknown
  • Magnetic Permeability, ASTM A596, Maximum; heat treatment unknown
  • Magnetic Permeability, ASTM A596, Maximum; heat treatment unknown
  • Magnetic Coercive Force, Hc, ASTM A596, from 10,000 Gauss; heat treatment unknown
  • Magnetic Coercive Force, Hc, ASTM A596, from 10,000 Gauss; heat treatment unknown
  • Magnetic Saturation Flux Density, Bmax, ASTM A596, H-100 Oersted; after hydrogen annealing
  • Magnetic Saturation Flux Density, Bmax, ASTM A596, H-100 Oersted; after hydrogen annealing
  • Magnetic Remanence, Br, ASTM A596, heat treatment unknown
  • Magnetic Remanence, Br, ASTM A596, heat treatment unknown
  • Curie Temperature
  • CTE, linear
  • Specific Heat Capacity
  • Thermal Conductivity
  • Melting Point
  • Carbon, C
  • Iron, Fe, As Balance
  • Manganese, Mn
  • Nickel, Ni
  • Silicon, Si
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

Manufacturer Notes:
none

Category Notes
none

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

 

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.